Usb 2.0 Connection Options - OWC Mercury Rack Pro 4 Bay Storage Enclosure Owner's Manual

USB 2.0 & Other Connection Options
Connection option #4 - Connect to the same USB 2.0 source (built in
USB 2.0 ports, or a PCI/PCIe USB 2.0 card) using two cables - direct con-
nection for each bridge card.
Connection option #5 - This option allows you to use both a FireWire
800 and a USB 2.0 connection. Connect one cable from the FireWire 800
ports on either bridge card to the computer, and then connect the USB
2.0 connection on the opposite bridge card to the computer.
This allows you to maximize the performance, of the storage solution,
even though you do not have two identical interfaces.
FireWire 400 Connection - same as the FireWire 800 connection op-
tions on the previous page - but you can use a FireWire 400 to 800 (9-6
pin) converter cable. This is slower, but offers a broader range of com-
patibility with different systems.
11
Check "Perform a quick format" and choose which file system
Step
you want to use. NTFS is default and recommended. Click
Next when you are ready.
12
This screen is an overview of the settings you have chosen to
Step
format the disk with. Click Finish when you are ready.
Page 7 Page 28