Cateye Padrone Smart CC-PA500B User Manual page 4

2. Configure Smart computer
The following Smart computer-related settings are configured automatically by the smartphone:
Time
- Adjusted every time the computer connects to the smartphone
Unit (km/mile)
Registering smart sensors for use with sensor direct mode
- Smart sensors synced with mirror mode smart sensors that are registered in the app.
The Smart computer and smart sensors displayed in
can also be used in sensor direct mode.
NOTE
To use a smart sensor, it must first be registered (paired)
with a parent device. However, because a smart sensor
that has been registered in a smartphone is also automati-
cally registered in the connected Smart computer , there is
no need to pair the smart sensor with the Smart computer.
Other Smart compouter-related settings
Configure the Display Customization, Odometer, and
Clock (12h/24h) settings via the following procedure:
Device > CYCLOCOMPUTER
* Only possible when the cyclocomputer is connected to a smartphone
- Synced with app unit settings
Device
,
Can be used with CC-1 in
sensor direct mode
(2) Smart sensor information from smartphone
automatically registered in Smart computer
Registered
Smart
sensor
(1) Smart sensor paired
with smartphone
Smartphone
(Parent device in
mirror mode)
Mirror Mode
Smart sensor
* Smart sensors cannot be paired with multiple parent devices at the same time.
SMART COMPUTER P. 3 BEFORE USE
Registered
Smart
sensor
Smart computer
(Parent device in sensor direct mode)
(3) Smart sensor and Smart computer
can be connected
Sensor Direct Mode