Set-Up - ICS 680GC Operator's Manual

680GC OPERATOR'S MANUAL
GUIDE BAR AND DIAMOND CHAIN INSTALLATION
STEP 1
Loosen side cover nuts and remove side
cover.
STEP 2
Remove shipping spacer.
STEP 3
Place bar onto studs and chain adjustment
pin.
F/N 525746 Jan 09
STEP 4
Mount the diamond chain on the guide bar
starting at the drive sprocket and continue
over the guide bar nose.
Install the diamond chain correctly.
If using a single bumper chain, the
bumper must always lead the segment
into the cut as shown here.
STEP 5
Install the side cover.
© 2009 ICS, Blount Inc.
TITLE

SET-UP

9