Fujitsu PRIMERGY TX300 S4 Options Manual page 78

Installing a second processor
1
Figure 67: Installing the heat sink
Ê Place the heat sink correctly on the processor socket.
Ê Secure the heat sink with four screws. Tighten the screws in a crossover
pattern (1-2-3-4).
V
CAUTION!
If the heat sink is not correctly seated and secured, heat transfer is
impaired and the processor may overheat and shut off.
Ê Reinstall the system fan (see
78
4
2
3
page 113).
Options Guide
Processors
TX300 S4