Fujitsu PRIMERGY TX300 S4 Options Manual page 58

Installing a hard disks extension box
1
Figure 45: Variant 1 - routing the HDD backplane
Ê Connect the power supply connector P7 (standard PSU) or CON.2
(redundant PSU) to the HDD backplane (PSU connector) on the rear of the
hard disks extension box (1).
2
Ê Connect the I
(see the cabling plans in the Appendix).
2
Ê Secure the I C cable with a green clamp.
Figure 46: Cable clamp
Ê Connect the two backplanes with the SAS cable included (3+4) (see the
cabling plans in the Appendix).
58
3
2
2
C cable with the I
Con2
Options Guide
4
C bus connector (2) of the HDD backplane
Accessible drives
TX300 S4