Fujitsu PRIMERGY TX300 S4 Options Manual page 25

Preparation
Depending on how accessible the server is in the rack cabinet, it can make
sense to remove the server from the rack cabinet: If you do not want to remove
the server from the rack cabinet, please skip this page.
I
If the server is integrated in a Classic rack cabinet, instructions on how
to remove it are provided in the Operating Manual.
a
1
Figure 7: Removing the server from the rack cabinet
Ê Disconnect all cables on the rear of the server.
Ê Remove one screw on each side (1).
Ê Push the server a little way in the direction of the arrow (2) until the hooks
(a) on the telescopic rails are released.
V
CAUTION!
At least two people are needed to lift the server out of the rack cabinet.
Ê Lift the server out of the rails (3) and place it on a table, for example.
TX300 S4
3
2
Options Guide
Rack model
1
25