Conversion from a floorstand model to a rack model
Ê Lay the server on its right-hand side. Get a second person to help you do
this. The server can weigh up to 40 kg.
Ê Ensure that the feet project over the edge of the table.
Figure 97: Removing the feet
Ê Remove four screws from each of the feet.
Ê Remove the feet.
I
The feet are no longer required.
a
3
1
2
1
1
Figure 98: Removing the bar
Ê Remove the three screws (1) on the bar.
Ê Push the bar to the rear (2) until the hooks (a) disengage.
110
Options Guide
TX300 S4