Error Monitor Menu - Sony KF-50SX200 Service Manual

1-2. ERROR DETECTION MONITOR
Device acknowledge is used to check IIC errors.
Each device is checked three times, if there is no acknowledge after every attempt, it will be regarded as an error.
There are three step to check errors.
1. IIC line 0
If all devices except the NVM have errors, IIC line 0 error is displayed.
2. Each device check
if IIC line error and board error are not detected then the device with an error is displayed.
The detected errors can be displayed as follows:

1. Error Monitor Menu

2. Error Reader
1-2-1. Error Monitor Menu
The error monitor menu is displayed by selecting Service mode : Monitoring. The following menu will be displayed:
Error Monitor
1
Operating Time :
Stored Errors :
1. J-B MSP3411G
2. B3-B CXA2101 MCP
3. J-B CXA2123 Main Col Dec
4. Error Code Not Valid
5. Error Code Not Valid
Current Error :
Error Monitor
1
5
4
3
Ignore Errors OFF
000021 h 40 min
Start Error Sequence
LAMP : 0
LAMP DRIVER : 0
FAM : 0
LAMP COVER : 1
WDT-E : 0
KF-50SX200/50SX200K/50SX200U
ON ON
– 6 –
Error Monitor
LCD-Engine error menu
K
RM-905