Electrical Adjustments; Adjustment With Commander; How To Select Each Mode; How To Enter Tt Mode - Sony KF-50SX200 Service Manual

3-1. ADJUSTMENTS WITH COMMANDER
Service adjustment to this model can performed with the supplied
remote commander RM-905.
MUTE
TV MODE
ON SCREEN
DISPLAY
PICTURE
MODE
Live/Personal/
Movie/Game MENU
VOLUME +
MENU
TV
RM-905
RM-905

3-1-1. How to Select Each Mode

1. Selection of Mode between PAL and NTSC
PAL mode : Enter PAL signal with color burst.
NTSC mode : Enter NTSC signal with color burst. (VIDEO
input only)
2. Selection of Picture Mode
1) Press " (GREEN)" button on the commander.
2) Press v or V key on the joystick to select picture mode and
press " (OK)" button. At this time, normal screen comes
back. (In the TT mode, the menu is switched to the Service
menu.)
3. Selection of Screen Mode
1) Press " (BLUE)" button on the commander.
2) Press v or V key on the joystick to select screen mode and
press " (OK)" button. At this time, normal screen comes
back. (In the TT mode, the menu is switched to the Service
menu.)
4. Displaying Multi PIP Mode
1) Press " (YELLOW)" button on the commander.
2) Press it once more, normal screen comes back. (In the TT
mode, the menu is switched to the Service menu.)
5. Displaying PAP Mode
1) Press " " button on the commander.
2) Press it once more, normal screen comes back. (In the TT
mode, the menu is switched to the Service menu.)
SECTION 3

ELECTRICAL ADJUSTMENTS

TV STANDBY
PAP
TV
JOYSTICK
SCREEN
MODE
OK
Wide/Zoom/
14:9/4:3/
Smart
PROG
PIP

3-1-2. How to Enter TT Mode

1. Turn on the main power switch to place this set in standby
mode. (LED will light in red.)
2. Press the buttons on commander as follows, and the TT
mode will be selected.
5
( ON SCREEN ) (DIGIT 5)
DISPLAY
"TT - -" will appear in the top right corner of the screen.
Other status information will also be displayed.
3. If " (TV MODE)" button or "-" + "-" button is pressed,
the set exits from the TT mode and returns to normal TV mode.

3-1-3. How to Enter Service Menu

1. Select TT mode.
2. Press "MENU" button on the commander once, and normal
menu screen will appear, or press it once more, and the fol-
lowing service menu screen will appear.
Service AE5(A)
Initialising
Reset Devices
Monitoring
Device Register Setting
Special Adjustment
Select : v V Next menu : B
3. Following the screen, press v or V key on the joystick to
select the desired item, and press B key to enter the selected
item.
4. Press v or V key on the joystick to change data of each item,
and press " (OK)" button to write changed data.
(Except Projector Engine mode)
5. To return from each item, press b key on the joystick. Or, to
return to the TT mode, press the "MENU" button.
(Except Projector Engine mode)
– 15 –
KF-50SX200/50SX200K/50SX200U
(VOLUME +) (TV MODE)
K
RM-905
Enter the
"TT MODE"