Before First Use; Initial Cleaning; Setting The Time - AEG 49002VMN User Manual

www.aeg.com
8
To bake and roast or as a pan to col-
lect fat.
• Roasting pan grid

4. BEFORE FIRST USE

WARNING!
Refer to the Safety chapters.

4.1 Initial Cleaning

• Remove all accessories and removable
shelf supports (if applicable).
• Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
4.2 Sensor field
Touch and hold for minimum 1
second the sensor field on the
control panel to operate the ap-
pliance.

4.3 Setting the time

You must set the time before you
operate the oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time function flashes.
To put in the deep roasting pan.
Press the + or - button to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
You can only change the time
• The child safety device is not
• None of the clock functions
• No oven function is set.
4.4 Preheating
Preheat the empty appliance to burn off
the remaining grease.
1.
Set the function
mum temperature.
2. Let the appliance operate for one
hour.
3.
Set the function
mum temperature.
1s
4. Let the appliance operate for ten mi-
nutes.
5.
Set the function
mum temperature.
6. Let the appliance operate for ten mi-
nutes.
Accessories can become hotter than
usually. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow is sufficient.
if :
on.
Duration or End
and the maxi-
and the maxi-
and the maxi-
is set.