Classic Series Custom Panels - KitchenAid W10379133A Installation Manual

If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT: Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (
Panels that are more than
panels are less than " (6.35 mm) thick, install a filler panel
between the doors and decorative panels.
Top Grille Panel
The top grille panel should not weigh more than 10 lbs (4.5 kg).
NOTE: The dashed lines in the illustration represent the location
and offsets of raised wood panel.
7"
(17.78 cm)
Top & Bottom Offsets
" thick
plywood
Model A
36
42
48
16

Classic Series Custom Panels

" (1.5 mm) tolerance.
" (6.35 mm) thick must be routed. If
A
Side Offsets
" (1.11 cm)
" (1.75 cm)
34 " (87.0 cm)
40 " (102.2 cm)
46 " (117.5 cm)
Door Panels for Non-dispenser Models
The freezer panel should not weigh more than 40 lbs (18.1 kg).
The refrigerator panel should not weigh more than 50 lbs (23 kg).
A
"
(1.27 cm)
Freezer
Door
(Non-Dispenser)
(178.9 cm)
" thick
plywood
3 "
(8.3 cm)
"
"
(1.1 cm)
(1.27 cm)
Model A
36 14 " (36.2 cm)
42 16 " (42.6 cm)
48 19 " (48.9 cm)
NOTES:
If the standard handle is used, the handle side offset of
both panels should be 3 " (8.25 cm) to all for finger
clearance.
If an extended handle is used, the handle side offset of
both panels should be
refrigerator location allows the doors with extended
handles to open to 90 degrees. See "Door Swing
Dimensions."
The dashed lines in the illustration represent the location
and offsets of raised wood panel.
B
(1.27 cm)
Refrigerator
Door
70 "
3 "
(8.3 cm)
Location and offsets
of raised wood panel
(1.27 cm)
B
19 " (48.9 cm)
22 " (57.8 cm)
26 " (66.7 cm)
" (1.1 cm). Make sure the
"
"
(1.1 cm)
" thick
plywood
"