Switching The Display On/Off; Time - Mercedes-Benz COMAND control unit Operator's Manual

Switching the Display On/Off

X To switch the display off: Select System
£Display Off.
The display is switched off.
X
To switch on the display: Press the 9
button, the k button or one of the
=, ;, : or 9 buttons.
or
X
Press the q button.
The system menu appears.
i You can also press one of the function
buttons, e.g. the h button. This turns on
the display and switches to the
corresponding function.

Time

Setting the Time
i The correct time must be set for the
following navigation system functions to
operate correctly:
Calculation of expected time of arrival
R
Time stamps for calls received and calls
R
dialed
X
Select System£Settings£Time
£Set Time.
Sets the time
1
Current date
2
X
To set value: Press : or 9.
X
To save setting: Press 9.
i
The increment for setting the minutes
depends on the situation. It is 30 minutes
if the vehicle is equipped with a navigation
system and if GPS is being received. It is
one minute if GPS reception is not
available.
i
If you change the time in 30 minute steps,
previously selected settings for time zone
and switching between summer time and
standard time are lost.(
Setting the Date/Time Format
X Select System£Settings£Time
£Format.
The format list appears. The dots R in
front of the list entries indicate the current
setting.
i The abbreviations mean:
Date format: DD - Day, MM - Month, YY/
YYYY - Year
Time format: HH - Hour, MM - Minute for
either 24-hour clock or AM/PM format
X
To change format setting: Press : or
9.
X
To confirm selection: Press 9.
X
To save setting and quit menu: Press
= or ;.
Setting the Time Zone and Switching
Between Daylight Saving Time and
Standard Time
i The correct time zone and daylight
saving/standard time must be set for the
following navigation system functions to
operate correctly:
Calculation of expected time of arrival
R
Time stamps for calls received and calls
R
dialed
Time
Y page 39).
Z
39