Language Setting; Display Settings - Mercedes-Benz COMAND control unit Operator's Manual

Display Settings

40
X
To set the time zone: Select System
£Settings£Time£Time Zone.
A time zone list appears. The R dot
indicates the current setting.
X
Press : or 9 to select the
appropriate time zone.
X
To switch between Daylight Saving and
Standard Time: Select Daylight Saving
Time (Summer) or Standard Time
(Winter).
The R dot indicates the current setting.
X
To save setting and exit menu:
Press = or ;.

Language Setting

This function allows you to determine the
language for the menu displays and the
navigation messages. The language selection
affects the input options in the editing and
smart speller.
X
Select System£Settings£Language.
The language list appears. The R dot
indicates the current setting.
X
To change setting: Press : or 9 to
select the desired language.
X
To confirm the language selection:
Press 9.
COMAND loads the selected language and
sets it.
i If you change the system language, the
language for Voice Control will be also be
changed. If the selected language is not
supported by the Voice Control system,
"English" will be selected.
Display Settings
Adjusting Brightness
X
Select System £ Settings £ Display
£ Brightness.
Brightness bar
1
X
To adjust brightness: Press 9
or :.
The brightness bar moves up or down.
X
To confirm selection: Press 9 or press
=.
or
X
Press the k button.
Setting the Display Design
X
Select System£Settings£Display.
X
Select Day mode, Night mode or
Automatic.
The R dot indicates the current setting.
In the Automatic setting, COMAND
i
evaluates the automatic vehicle light
sensor and automatically switches over the
display design.