Switching To - Mercedes-Benz COMAND Operating Instructions Manual

Climate control settings
60
With the synchronization function switched
off, you can alternate between driver and
front passenger.
To switch from the footer to the main area:
X
slide VZ the controller.
To switch between left and right: slide
X
XVY the controller.
Not all climate control functions allow
switching between the driver and front
passenger.
i
The synchronize function can also be
deactivated by sliding the controller to the
left or right in the setting area. The setting
elements for the driver and front passenger
are then shown separately once again.
Further information (see the vehicle
Operator's Manual).
Switching to the rear-compartment air
conditioning setting
You can also set the rear-compartment air
conditioning from the front.
Call up the climate control menu
X
( page 59).
Y
To switch to the footer: slide V¬ the
X
controller.
To select the
X
press the controller.
You switch to the rear-compartment air
X
conditioning setting. The vehicle interior
display changes accordingly.
To switch the setting back to the front
X
again: select Return to Return to Front
After a short time, COMAND automatically
switches the adjustment functions back to
the front.
Switching cooling with air
dehumidification on/off
Activating the cooling with air
dehumidification facilitates the cooling of the
vehicle interior even with high outside
temperatures.
Rear Rear Setting Setting: turn and
Front.
Call up the climate control menu
X
( page 59).
Y
To switch to the footer: slide V¬ the
X
controller.
To select A/C: turn and press the controller. A/C
X
Switch cooling with air dehumidification on
X
O or off ª.
i
The current status of the cooling function
is displayed in the climate control bar: AC
on – activated, AC off – deactivated
( page 59).
Y
Setting the temperature
To select the current temperature in the
X
climate control bar on the left or right: turn
and press the controller.
The temperature setting scale appears.
To change the setting: turn the controller.
X
To close the temperature setting scale:
X
press the controller.
i
You can also set the temperature using
the climate control menu, i.e. as described
for setting the footwell temperature
( page 61).
Y