Importing/Exporting Data - Mercedes-Benz COMAND Operating Instructions Manual

Importing/exporting data

General notes
! Never remove the stick or card when
writing data to the USB stick or the memory
card. You may otherwise lose data.
Using this function, you can:
transfer your personal COMAND data from
R
one system/vehicle to another.
make a backup copy of your personal data
R
(export data) and load it again (import
data).
protect your data from unwanted export by
R
activating a pin prompt (presetting:
deactivated ª).
You can either use an SD memory card or a
USB storage device (e.g. a USB stick) as
temporary storage.
Activating/deactivating PIN
protection
Press the Ø button.
X
The Vehicle menu appears.
To select System System Settings Settings: slide V¬,
X
turn and press the controller.
A menu appears.
To select Data Data Import/Export Import/Export: turn and
X
press the controller.
Select Activate PIN Activate PIN Protection
X
Activate O or deactivate ª PIN
protection. When activating PIN protection,
you will be prompted to enter a PIN.
Protection.
Importing/exporting data
To enter the 4-digit PIN and select ¬:
X
turn and press the controller.
You will be prompted to enter the PIN
again.
Enter the PIN again and select ¬.
X
The PIN prompt now protects your personal
data from unwanted export.
i
If you deactivate your PIN protection, you
will first be prompted to enter your PIN. If
you have forgotten your PIN, an authorized
Mercedes-Benz Center can deactivate your
PIN protection for you. Alternatively, you
can deactivate PIN protection by resetting
your personal COMAND data
( page 48).
Y
Importing/exporting data
Insert the SD memory card (
X
or
Connect a USB device (e.g. a USB memory
X
stick) ( page 195).
Y
Press the Ø button.
X
The Vehicle menu appears.
47
page 195).
Y