Download Print this page
Britax KID XP User Instructions
Britax KID XP User Instructions

Britax KID XP User Instructions

Advertisement

Quick Links

PAGE I
1. PRODUCT OVERVIEW
01
02
Belt holder (dark red)
Seat cushion
01
03
Belt guide (bright red)
XP-PAD
02
04
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle. The seat can be used in vehicles with a 3-point belt.
Please find the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle.
The
KID XP
is approved for one method of installation:
Symbol
Installation type
Approval type
with the vehicle's 3-point seatbelt
universal
You can use your child safety seat as follows:
In the direction of travel
yes
1)
against the direction of travel
no
15–36 kg
with 2-point belt
no
2)
with 3-point belt
yes
3)
on front passenger seat
yes
on outer rear seat
yes
on centre rear seat (with
4)
yes
3-point belt)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only
if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect
of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
140901_KID_XP_GB.indd 1
05
06
04
07
03
Backrest
Adjusting handle of the headrest
07
05
Storage compartment
06
5. CARE AND MAINTENANCE
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulfils im-
portant functions to ensure the smooth operation of the system. Replacement seat
covers are available from your dealer or from an ADAC office.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use
any caustic cleaning agents (such as solvents).
DANGER!
The child seat must not be used without the seat cover.
Removing the seat cover
1.
Moving the headrest of the vehicle seat into the top
position.
19
2.
Unhook the cover hook 19 on the rear of the backrest.
3.
Remove the top part of the cover and fold it forwards to
the seat surface.
4.
Unhook the cover hook 19 on the front of the backrest.
5.
Pull the cover off of the seat surface.
19
Removing the headrest cover
6.
Unhook the cover loop 20 on the rear of the backrest.
20
7.
Unhook the cover hook 19 on the front of the backrest.
8.
Pull off the cover of the headrest 22 .
22
The cover can now be washed. Please observe the
instructions on the washing label of the cover:
19
Re-fitting the cover
Proceed in reverse order to put on the cover.
2. INTRODUCTION
KID XP
We are delighted that our
can safely accompany your child through a
new stage in its life.
In order to protect your child correctly, the
KID XP
must always be used
and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
BRITAX RÖMER
Kindersicherheit GmbH
T.: +49 (0) 731 9345-199
Blaubeurer Straße 71
F.: +49 (0) 731 9345-210
D-89077 Ulm
E.: info@de.britaxeurope.com
Germany
www.roemer.eu
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
T.: +44 (0) 1264 333343
Andover
F.: +44 (0) 1264 334146
Hampshire SP10 3UW
E.: helpline@uk.britaxeurope.com
United Kingdom
www.britax.eu
These instructions use the following symbols stated below:
Symbol
Keyword
Explanation
DANGER!
Risk of severe personal injury
WARNING!
Risk of minor personal injury
CAUTION!
Risk of material damage
TIP!
Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
16
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt
in dark red and the lap belt
16
in bright red. The colour of the belt guides
15
on the child safety seat follows the same colour
15
scheme.
6. DISASSEMBLY AND DISPOSAL
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
TIP! The XP-PAD can remained applied for easier use on the diagonal
belt of your vehicle, the diagonal belt must be retensioned before every
journey; see: Section 10 step 12 [page II].
REMOVAL:
1. Operate the release key of your vehicle seat buckle
16
04
2. Open the XP-PAD
04
on the Velcro fastener and
remove the diagonal belt
.
16
3. Open the dark red belt holder
01
by pressing back-
wards the key on the belt holder
and unthread-
01
ing the diagonal belt
16
.
►The child safety seat can now be removed.
01
DANGER! the child safety seat must always be
secured when it is in the vehicle, even if no child is
being transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging
Container for cardboard boxes
Seat cover
Residual waste, thermal utilisation
Plastic parts
According to the labelling in the
corresponding container
Metal parts
Container for metals
Belt straps
Container for polyester
Buckle and tongue
Residual waste
3. Certification
BRITAX RÖMER
Testing and certification
Child safety seat
In accordance with ECE* R 44/04
Group
Body weight
KID XP
II+III
15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certified according to
the requirements of the European Standard for Child Safety Equipment (ECE
R 44/03). The seal of approval E (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modifications
to the child safety seat. Only the manufacturer is permitted to
make modifications to the child safety seat.
KID XP
WARNING! Use the
exclusively for securing your child in your
vehicle. It is in no way suitable as a seat or toy in the home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
15 to 36 kg
(~4 to 12 years of age)
KID XP
User instructions
www.britax.eu
02.09.2014 14:37:52
GB

Advertisement

loading

Summary of Contents for Britax KID XP

  • Page 1 5. CARE AND MAINTENANCE 6. DISASSEMBLY AND DISPOSAL Please observe the instructions for using children's restraining systems in the operating Please ensure that you only use the original BRITAX RÖMER replacement seat 15 to 36 kg UNFASTENING YOUR CHILD: instructions of your vehicle. The seat can be used in vehicles with a 3-point belt.
  • Page 2 3. Engage the buckle tongue in the vehicle seat buckle ►the seatbelt buckle must not be positioned on the red belt guide optimum protection of your car seat covers, we recommend using the BRITAX with a CLICK! the seat cushion.