Sony KL-W9000A Service Manual page 14

Adjusting the picture size (SIZE)
VIDEO RGB WIDE
CENTER/ MENU
SIZE
ENTER
After projecting the picture from a computer, you may
need to adjust the picture size to fit the monitor screen.
The setting is only for the input signal displayed on the
screen.
1
Press CENTER/SIZE until the SIZE adjustment
screen appears.
SIZE
H SIZE
CENTER/
V SIZE
SIZE
2
Press V, v, B or b to adjust the picture size.
For horizontal adjustment press B or b. (H SIZE)
b: to increase horizontal size
B: to decrease horizontal size
For vertical adjustment press V or v. (V SIZE)
V: to increase vertical size
v: to decrease vertical size
The SIZE adjustment screen automatically disappears
after about 10 seconds if you do not press any button.
You can also erase the SIZE adjustment screen by
pressing CENTER/SIZE again.
To reset to the factory preset setting
Press RESET on the monitor. At the same time, the
picture position (page 17) and video/audio settings
(pages 19 to 23) are also reset to the factory preset
levels.
Notes
• For a picture with resolution of 640 × 350, 640 × 400 or 640 ×
480, the vertical size cannot be increased from the size that was
projected the first time.
• You can adjust the size using the CENTER/SIZE and ◊/√/ı/
∫ buttons on the monitor.
18 -US Operations
Adjusting the clarity of the picture
(DOT PHASE)
VIDEO RGB WIDE
CENTER/ MENU
SIZE
ENTER
VOL
If the computer picture flickers or blurs, or horizontal
noise appears on the screen, adjust DOT PHASE to get
a clearer picture.
The setting is only for the input signal displayed on the
screen.
1
Press MENU.
MENU
2
Press V or v to select OPTION, and press
ENTER.
ENTER
3
Press V or v to select DOT PHASE, and press
ENTER.
ENTER
OPTION N
AUTO SHUT OFF:OFF
LANGUAGE: ENGLISH
DOT PHASE: 16
4
Press V, v, B or b to adjust the level to
obtain a clear picture.
5
Press MENU to return to the original screen.
Note
• You cannot use this function for the input from VIDEO 1 IN,
VIDEO 2 IN, VIDEO 3 IN and DVD IN.
Selecting the preset
picture viewing
mode
The video/audio mode feature allows you to choose
four different modes of picture/sound settings. Choose
the one that best suits the type of program that you
want to watch.
CENTER/
MENU
SIZE
ENTER
VOL
1
Press MENU.
2
Press V or v to select VIDEO/AUDIO, and
press ENTER.
ENTER VIDEO/AUDIO N
PRESENTATION
STANDARD
MOVIE
AV MEMORY
VIDEO ADJUST
AUDIO ADJUST
3
Press V or v to select the desired item, and
press ENTER.
ENTER
Choose To
PRESENTATION Watch the picture input from a
computer.
STANDARD Watch the picture input from video
equipment.
MOVIE Watch a movie.
AV MEMORY Adjust the quality of the picture/sound
to suit your taste. (For details, see pages
20 to 23.)
4
Press MENU to return to the original screen.
To reset to the factory preset setting
Press RESET on the monitor.
When watching a computer picture, the mode resets to
PRESENTATION. When watching a video picture, the
mode resets to STANDARD. At the same time, the
position and size of a computer picture (pages 17 and
18) are also reset to the factory preset levels. The
settings in AV MEMORY do not reset.
Note
• You cannot adjust the settings in modes other than AV
MEMORY.
Operations 19 -US
US