Toshiba Qosmio X300 Series User Manual page 58

58
Getting Started
Adding memory (optional)
NOTE
2 Pull the latches away from the memory module.
The memory module pops up slightly.
NOTE
3 Gently lift the memory module to a 30-degree angle and slide it
out of the slot.
Slot B
Front of computer
(Sample Illustration) Removing the memory module
Downloaded from LpManual.com Manuals
The following screen may appear when you turn on the power:
®
If "Start Windows
If one of the Safe Mode options is highlighted, it is best to press
to go into Safe Mode, then shut down and restart the system, at
Enter
which time Windows
When Safe Mode is suggested, this could be a sign that you may
need to scan your internal storage drive for errors or defragment the
drive. If so, consult Windows
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
Normally" is highlighted, then press
®
should boot back up normally.
®
Help and Support.
.
Enter
Slot A