1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. PQX32U-04M01M
  6. User manual

Toshiba PQX32U-04M01M User Manual

User manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Qosmio X300
computers.toshiba-europe.com

Advertisement

Table of Contents
loading

Related Manuals for Toshiba PQX32U-04M01M

Summary of Contents for Toshiba PQX32U-04M01M

  • Page 1 User’s Manual Qosmio X300 computers.toshiba-europe.com...
  • Page 2 Qosmio X300 Copyright © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
  • Page 3 This product and the supplied accessories are designed to observe the required EMC (Electromagnetic Compatibility) standards. However, Toshiba cannot guarantee that this product still observes these EMC standards if accessories or cables not manufactured/distributed by Toshiba are connected or implemented. To avoid in general EMC problems, the following advice should be observed: ■...

  • Page 4: Working Environment

    Any consequences resulting from the use of this product in working environments that are not approved or the use is restricted are not the responsibility of Toshiba Corporation. The consequences of the use of this product in those working environments may be: ■...
  • Page 5 Qosmio X300 Modem warning notice This information is applicable to the models equipped with a built-in modem. Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network...
  • Page 6 For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. The crossed out wheeled dust binsymbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.

  • Page 7: Optical Disc Drive Safety Instructions

    Your computer model may be ENERGY STAR Compliant. If the model ® you purchased is compliant, it is labeled with the ENERGY STAR logo on the computer and the following information applies.TOSHIBA is a partner in ® the Environmental Protection Agency’s (EPA) ENERGY STAR Program ®...
  • Page 8 Qosmio X300 Panasonic DVD Super Multi drive UJ880 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 9 Qosmio X300 Pioneer DVD Super Multi drive DVR-TD08TBA/DVR-TD08TBC ■ The Super Multi DVD drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 10 Qosmio X300 Hitachi-LG Data Storage DVD Super Multi drive GSA-T50N/GSA-T50F ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 11 Qosmio X300 International precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station."...

  • Page 12: Table Of Contents

    Special features ......... . 1-9 TOSHIBA Value Added Package ......1-11 Utilities and Applications.
  • Page 13 Writng CD/DVD on DVD Super Multi drives ....4-18 TOSHIBA DVD PLAYER ........4-27 Remote Controller .
  • Page 14 TOSHIBA support ........

  • Page 15: Manual Contents

    Qosmio X300 Preface Congratulations on your purchase of the Qosmio X300 series computer. This powerful notebook computer provides excellent expansion capability, includes multimedia functionality, and is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Qosmio X300 computer.
  • Page 16 Qosmio X300 Chapter 4, Operating Basics, includes instructions on using the following devices: TouchPad, Sound System, optical media drives, modem, wireless communication and LAN. It also provides tips on care of the computer, and CD/DVDs. Chapter 5, Keyboard, describes special keyboard functions including hot keys.
  • Page 17 Qosmio X300 Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, CTRL + C means you must hold down CTRL and at the same time press C.

  • Page 18: General Precautions

    Qosmio X300 General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 19 Qosmio X300 Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation.

  • Page 20: Instruction Manual For Safety And Comfort

    Qosmio X300 Mobile phones Please be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use.
  • Page 21 Qosmio X300 Cooling vent Cooling vents To prevent possible overheating of the CPU, make sure the cooling fan's air intake is not blocked. The fan draws in air by creating a vacuum. If the fan is blocked, it could cause the CPU to run at a lower performance level or cause the computer to shut down.

  • Page 22: Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.

  • Page 23: Hardware

    Processor Built-in The processor type varies depending on the model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start All programs TOSHIBA Utilities PC Diagnostic Tool. ®...
  • Page 24 Introduction Legal Footnote (CPU) For more information on the CPU, please refer to the Legal Footnotes section in Chapter 10or click the *1 above. Memory ■ A 32-bit operating system can not address more than 4 GB of memory. If your configuration has two 2 GB memory modules, only approximately 3 GB will be reported.
  • Page 25 Introduction Legal Footnote (Battery Life) For more information regarding Battery Life, please refer to the Legal Footnotes section in Chapter 10 or click the *3 above. RTC battery The internal RTC battery backs up the Real Time Clock and calendar. AC adaptor The AC adaptor provides power to the system and recharges the batteries when they are low.

  • Page 26: Optical Disc Drive

    Introduction ■ In this manual, the word "HDD" or "Hard disk drive" also refers to the SSD unless otherwise stated. ■ SSD is a large-capacity storage media which uses Solid-State Memory in place of a magnetic disk of the hard disk. ■...

  • Page 27: Video Modes

    Introduction Display The computer's internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability. Built-in Models are equipped with one of the following 17" TFT LCD screens with 32 million colors: ■...
  • Page 28 Introduction Please note that it is not possible to confirm the operation of all functions of all USB devices that are available. In view of this it may be noted that some functions associated with a specific device might not operate properly.
  • Page 29 Introduction Display port (optional) Display port (DP) can connect DP connector with DP cable. DP cable can send video signals. In addition to this, it can send and receive control signals. Some models are equipped with a Display port Headphone/S/PDIF/ This jack lets you connect digital speakers or a Line-out jack stereo headphone (16 ohm minimum).

  • Page 30: Special Features

    Connects a security lock to anchor the computer to a desk or other large object. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 31 Introduction Hot keys are specific key combinations that let Hot keys you quickly change the system configuration directly from the keyboard without running a system program. Display automatic This feature automatically cuts off power to the power off computer's display panel when there is no keyboard input for a specified time, with power being restored the next time a key is pressed.

  • Page 32: Toshiba Value Added Package

    TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the...
  • Page 33 The TOSHIBA Password utility allows you to set Utility a password in order to restrict access to the computer. TOSHIBA Flash Cards The TOSHIBA Flash Cards provide a quick way to modify selected system functions and to launch applications. ■...

  • Page 34: Utilities And Applications

    Bluetooth functions cannot be used in models that do not have a Bluetooth module installed. TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides access to specific tools, utilities and applications that make the use and configuration of the computer easier.
  • Page 35 This has the same function as the Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. User’s Manual 1-14...

  • Page 36: Optional Accessories

    CD playback and which can lessen the operational noise. This utility does not have any function when using DVD's. TOSHIBA Face Some models are equipped with a TOSHIBA Recognition Face Recognition. TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in to Windows.

  • Page 37: Chapter 2 The Grand Tour

    The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section in Chapter 10 or click the *8 above.

  • Page 38: Left Side

    The Grand Tour ® ■ Turn Wi-Fi and Bluetooth functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device when using any Wi-Fi or Bluetooth functionality.
  • Page 39 The Grand Tour Keep foreign metal objects, such as screws, staples and paper clips, out of the ExpressCard slot and PC Card slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

  • Page 40: Right Side

    The Grand Tour Right side The following figure shows the computer’s right side. Headphones/S/ Universal Serial PDIF Line Out Bus (USB 2.0) port Volume Microphone Modem Jack Bridge control Line in Media Card Reader The right side of the computer Volume control Use this dial to adjust the volume of the stereo speakers or headphones.

  • Page 41: Back

    The Grand Tour ■ Connection to any communication line other than an analog phone line could cause a computer system failure. ■ Connect the built-in modem only to ordinary analog phone lines. ■ Never connect the built-in modem to a digital line (ISDN). ■...
  • Page 42 The Grand Tour DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries. Please note that you should only use the model of adaptor supplied with the computer at the time of purchase - using the wrong adaptor can cause damage to the computer.

  • Page 43: Underside

    The Grand Tour Underside The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage. Thermal Fan Holes Memory module slots Speaker (subwoofer) Battery Release Latch...

  • Page 44: Front With The Display Open

    The Grand Tour Battery release latch Slide and hold this latch into its "Unlock" position in order to release the battery pack ready for removal. For more detailed information on removing the battery pack please refer to Chapter 6, Power. Battery safety lock Slide this latch into its "Unlock"...
  • Page 45 The Grand Tour Display hinge The display hinges allow the display panel to be position at a variety of easy-to-view angles. Stereo speakers The speakers will reproduce all of the sounds generated through the installed software, together with any alarms, such as that accompanying a low battery condition, that are generated by the system.
  • Page 46 The Grand Tour Web Camera Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. Camera Assistant Software will help you to add various video effects to your video or photograph.

  • Page 47: System Indicators

    The Grand Tour System indicators The LED system indicators for specific computer operations glow when those operations are in progress. System indicators DC IN The DC IN indicator normally glows Red when power is being correctly supplied from the AC power adaptor.

  • Page 48: Keyboard Indicators

    The Grand Tour Keyboard indicators The following figures show the positions of the CAPS LOCK indicator and the NUMLOCK indicators which show the following conditions: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed. ■...

  • Page 49: Optical Disc Drives

    The Grand Tour Optical disc drives A Serial ATA interface controller is used for CD and DVD operation and has an indicator at its front which will glows to indicate that it is in use. Region codes for DVD drives and media DVD Super-Multi drives and their associated media are manufactured according to the specifications of six marketing regions.
  • Page 50 The Grand Tour Formats The drives support the following formats: ■ CD-ROM ■ CD-RW ■ ■ DVD-ROM CD-DA ■ ■ DVD-R CD-Text ■ ■ DVD-R (Dual Layer) CD-ROM XA Mode 2 (Form1, Form2) ■ DVD-RW ■ CD-ROM Mode 1, Mode 2 ■...

  • Page 51: Ac Adaptor

    TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 52: Chapter 3 Getting Started

    Getting Started Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: ■ If the battery pack is not pre-installed in the computer that you purchased, please install the battery pack before you start using the computer.

  • Page 53: Connecting The Ac Adaptor

    TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 54: Opening The Display

    Getting Started 1. Connect the power cord to the AC adaptor. Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model. 2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the back of the computer.
  • Page 55 Getting Started Display panel Opening the display Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. ■ As the display panel cannot be opened until 180 degrees, please be careful of the angle when flipping open the display panel.

  • Page 56: Turning On The Power

    Getting Started Turning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Power indicators section in Chapter 6, Power for more information. ■ After you turn on the power for the first time, do not turn it off until you have set up the operating system.

  • Page 57: Turning Off The Power

    Getting Started Turning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on.

  • Page 58: Executing Sleep Mode

    Getting Started ■ Before entering Sleep Mode, be sure to save your data. ■ Do not install or remove a memory module while the computer is in Sleep Mode. The computer or the memory module could be damaged. ■ Do not remove the battery pack while the computer is in Sleep Mode (unless the computer is connected to an AC power source).

  • Page 59: Hibernation Mode

    Getting Started ■ Close the display panel. Please note that this feature must be enabled within the Power Options (to access it, click Start Control Panel System and Maintenance Power Options). ■ Press the power button. Please note that this feature must be enabled within the Power Options (to access it, click Start Control Panel System and Maintenance...

  • Page 60: Restarting The Computer

    Getting Started Starting Hibernation Mode You can also enable Hibernation Mode by pressing Fn + F4 - please refer to Chapter 5, Keyboard, for further details. To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Click the arrow button ( ) in the power management buttons ) and select Hibernate...

  • Page 61: System Recovery Options And Restoring The Pre-Installed Software

    Creating optical Recovery Discs and restoring the pre-installed software from them ■ Restoring the pre-installed software from the Recovery hard disk drive ■ Ordering Recovery Discs from TOSHIBA and restoring the pre-installed software from them* * Please note that this service is not free-of-charge. User’s Manual 3-10...
  • Page 62 Getting Started Creating Optical Recovery Discs This section describes how to create Recovery Discs. ■ Be sure to connect the AC adaptor when you create Recovery Discs. ■ Be sure to close all other software programs except the Recovery Disc Creator.

  • Page 63: Recovery Discs

    1. Load the Recovery Discs into the optical disc drive and turn off the computer's power. 2. While holding down F12 key on the keyboard, turn on your computer - TOSHIBA when the logo screen appears, release the F12 key.

  • Page 64: Ordering Recovery Discs From Toshiba

    Getting Started 1. Turn off the computer. 2. Turn on the computer and when the TOSHIBA screen appears repeatedly press the F8 key. 3. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press ENTER.
  • Page 65 Getting Started 3. Use the cursors key to select the CD-ROM icon from the menu. Please refer to the Boot Priority section in Chapter 7,HW Setup, for further information. 4. A menu will be displayed from which you should follow the on-screen instructions.

  • Page 66: Chapter 4 Operating Basics

    Operating Basics Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it, and details the considerations that should be made when handling CD/DVD media. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

  • Page 67: Av Controller

    Operating Basics You can also tap the Touch Pad to perform functions similar to those of the left button on a standard mouse. Click: Tap once Double-click: Tap twice Drag and drop: Tap to select the item(s) you want to move, leave your finger on the Touch Pad after the second tap and then move the item(s) to their new destination.

  • Page 68: Points To Note About The Fingerprint Sensor

    Operating Basics How to Swipe your Finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures: Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you until the sensor surface becomes visible.
  • Page 69 Operating Basics ■ Do not touch the sensor with a finger or any other object which may have a build-up of static electricity on it. Observe the following before you place your finger on the sensor whether for fingerprint enrollment/registration or recognition. ■...

  • Page 70: Fingerprint Registration

    Operating Basics Setup Procedure Please use the following procedure when first using fingerprint authentication. Fingerprint Registration You should initially enroll the required authentication data using the Fingerprint Enrollment Wizard. ■ In use, the fingerprint authentication system will use the same username and password as defined within the Windows operating system.

  • Page 71: How To Delete The Fingerprint Data

    Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

  • Page 72: Windows Logon Via Fingerprint Authentication

    Operating Basics Points to note about the Fingerprint Utility software You are able to backup saved fingerprint data and information within the PasswordBank by using the Import or Export User Data facility under the fingerprint management software. However, please be aware that any encrypted files cannot be backup within FileSafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes.

  • Page 73: How To Enable Fingerprint Pre-Os Authentication Settings

    Operating Basics ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint Pre-OS Authentication and its extended function to allow fingerprints to be used to access the computer when it is turned on.

  • Page 74: Fingerprint Utility Limitations

    TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.

  • Page 75: Web Camera

    Operating Basics Web Camera Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. Camera Assistant Software will help you to add various video effects to your video or photograph.

  • Page 76: Using Toshiba Face Recognition

    ■ TOSHIBA Face Recognition records face data in a log when face recognition fails. When transferring ownership or disposing of your computer, please uninstall the application or delete all the logs created by the application.

  • Page 77: How To Register The Face Recognition Data

    Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
  • Page 78 Utilities TOSHIBA Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition. Two authentication modes are provided. ■ AUTO Mode Login screen: If the face authentication tile is selected by default, you can log in without using the keyboard or mouse.

  • Page 79: Auto Mode Login Screen

    Operating Basics ■ 1:1 Mode Login screen: This mode is essentially the same as AUTO mode, but the Select Account screen will appear before the Display Captured Image screen, and you will need to select the user account to be authenticated in order to start the authentication process. AUTO Mode Login screen 1.

  • Page 80: Loading Discs

    Operating Basics Loading discs To load CD/DVD's, follow the steps as listed below and refer to figures 4-4 to 4-6. 1. When the computer's power is on, press the eject button to open the disc tray slightly. Eject button Pressing the eject button 2.
  • Page 81 Operating Basics 3. Lay the CD/DVD, label side up, in the disc tray. Laser lens Inserting a CD/DVD When the disc tray is fully opened, the edge of the computer will extend slightly over the area where you insert the media. Therefore, when loading a CD, DVD, you will need to turn it slightly at an angle when you place it in the disc tray.

  • Page 82: Removing Discs

    Operating Basics Removing discs To remove CD/DVD’s, follow the steps as listed below. Do not press the eject button while the computer is accessing the media in the drive, instead wait for the indicator to go out before you open the disc tray.

  • Page 83: Writng Cd/Dvd On Dvd Super Multi Drives

    ■ CD-R/RW media cannot be accessed using the Create CD/DVD option in Media Center. ■ To write data to CD-R/-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. User’s Manual 4-18...

  • Page 84: Important Message

    Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. User’s Manual...
  • Page 85 Operating Basics CD-R: TAIYO YUDEN CO., Ltd. MITSUBISHI KAGAKU MEDIA CO., LTD. Ricoh Co., Ltd. Hitachi Maxell,Ltd. CD-RW: (Multi-Speed and High-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. Ricoh Co., Ltd. CD-RW: (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN Co.,Ltd.
  • Page 86 Operating Basics ■ DVD Super Multi drive cannot use discs that allow writing faster than 16x speed (DVD-R and DVD+R media), 8x speed (DVD-R (Dual Layer), DVD+RW and DVD+R (Double Layer) media), 6x speed (DVD-RW media), 5x speed (DVD-RAM media). ■...

  • Page 87: When Writing Or Rewriting

    CD/DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 88: Toshiba Disc Creator

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.

  • Page 89: Data Verification

    DVD-ROM and DVD-ROM/CD-R/RW drives cannot read this added data regardless of the operating system. ■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to achieve this you should use Windows Explorer or another similar utility.

  • Page 90: How To Learn More About Ulead Dvd Moviefactory

    DV-Camcorder: 1. Click Start All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Insert a DVD-RW or DVD+RW disc in Burner. 3. Click Video Disc Burn Video to Disc to launch Direct Recording dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.
  • Page 91 Operating Basics ■ Operate the computer at Full Power. Do not use power-saving features. ■ While you are editing DVD, you can display previews. However, if another application is running. The preview might not display properly. ■ DVD MovieFactory cannot edit or play copy protected content. ■...

  • Page 92: Toshiba Dvd Player

    DVD Video during times when there is no recording pre- scheduled. 5. The resume function cannot be used with some discs on the "TOSHIBA DVD PLAYER". 6. Use DVD-Video discs with a region code which is either "the same as the factory default setting"...
  • Page 93 Operating Basics Display Devices & Audio 1. "TOSHIBA DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start...

  • Page 94: Remote Controller

    When an DVD-Video disc is set in the DVD drive, the following application selection screen may appear. If this occurs, select Play DVD movie, then click OK to launch the TOSHIBA DVD PLAYER. 2. Touch the CD/DVD panel on the Front operation panel. Or select...

  • Page 95: Slim Size Remote Controller

    Operating Basics Slim size remote controller Brightness up Brightness down CD/DVD Power DVD Menu Volume + Illumination On/Off Arrows Volume - Back More info Mute Rewind Play/Pause Fast Forward Start Stop Skip Replay Slim size remote controller CD/DVD Pressing this button will launch an application program that allows you to watch a DVD or listen to a CD.
  • Page 96 Operating Basics Power Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer. To change the setting, click Start, select Control panel System and Maintenance...

  • Page 97: Using The Remote Controller

    Operating Basics Stop Stops the media currently playing. Skip Moves media forward (30 seconds for videos, one music track or one DVD chapter). Using the Remote Controller This computer includes a remote control unit, which allows you to control some of your computer’s functions from a distant location. ■...

  • Page 98: Installing/Removing Batteries

    Operating Basics Even if within the effective scope as described above, the remote control may malfunction or not work correctly in the following cases. ■ When an obstacle stands between the infrared receiver window of your computer and the Remote Controller. ■...

  • Page 99: Installing The Battery

    Operating Basics Slim size remote controller Installing the battery 1. Open the battery cover on the back side of the remote controller. Battery cover Opening the battery cover 2. Be sure to place the battery with correct polarities. Press the battery down to the stopper then push it forward to fit into the battery case.

  • Page 100: Placing Slim Size Remote Controller

    Operating Basics 3. Insert the battery in place. Be sure to place the batteries with correct polarities. Press the battery down to the stopper then push it forward to fit into the battery case. 4. Close the battery cover. Close the cover securely until it clicks. Placing Slim size remote controller Inserting a Slim size remote controller To insert a Slim size remote controller, follow the steps as detailed below:...

  • Page 101: Media Care

    Operating Basics Media care This section provides tips on protecting data stored on your CD's, DVD's and floppy diskettes. Handle your media with care. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it. CD/DVDs 1.

  • Page 102: Sound System

    Operating Basics 8. Data may be lost if the floppy diskette is twisted, bent, or exposed to direct sunlight, extreme heat or cold. 9. Do not place heavy objects on your floppy diskettes. 10. Do not eat, smoke, or use items such as erasers near your floppy diskettes as foreign particles inside the jacket of the floppy diskette can damage the magnetic surface.

  • Page 103: Speaker Configuration

    Operating Basics When you first launch the Realtek Audio Manager, you will see following device tabs. Speakers is the default output device. Microphone is the default input device. To change the default device, click the Set Default Device button under the chosen device tab. ■...

  • Page 104: Modem

    Operating Basics ® ■ Dolby Pro Logic IIx - Expands any existing stereo- or 5.1-channel audio from movies, music, TV, or game audio source to a 6.1- or 7.1- channel playback. ■ Dolby Headphone - Personal surround sound using any set of headphones so listeners feel like the action is happening all around them.

  • Page 105: Region Selection

    Check the specified areas carefully before using it. To select a region, follow the steps as detailed below: 1. Click Start All Programs TOSHIBA Networking Modem Region Select. If it is available, do not use the Country/Region Select function included as...

  • Page 106: Modem Selection

    Operating Basics AutoRun Mode Allows you to configure whether the Modem Region Select utility starts automatically whenever you start up the operating system. Open the Dialing Properties dialog box after selecting region Allows you to configure whether the dialing properties dialog box will be displayed automatically after you have selected a region.

  • Page 107: Wireless Communications

    Operating Basics ■ Connection to any communication line other than an analog phone line could cause a computer system failure. ■ Connect the built-in modem only to ordinary analog phone lines. ■ Never connect the built-in modem to a digital line (ISDN). ■...
  • Page 108 ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. User’s Manual 4-43...

  • Page 109: Worldwide Operation

    This Bluetooth Stack is based on the Bluetooth Version 1.1/1.2/2.0+EDR/2.1+EDR pecification. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic devices that use Bluetooth, other than TOSHIBA notebook computers. User’s Manual 4-44...

  • Page 110: Product Support

    Operating Basics Release Notes related to the Bluetooth Stack for ® Windows by TOSHIBA 1. Fax application software: Please be aware that there is some fax application software that you cannot use on this Bluetooth Stack. 2. Multi-user considerations: ®...

  • Page 111: Lan

    Operating Basics Wireless communication indicator The wireless communication indicator shows the status of the computer's wireless communication functions. Indicator status Indication Indicator off The wireless communication switch is off - no wireless functionality is available. Indicator glows Wireless communication switch is on. Wireless LAN or Bluetooth is turned on by an application.

  • Page 112: Connecting The Lan Cable

    Operating Basics Connecting the LAN cable To connect the LAN cable, follow the steps as detailed below: ■ Connect the AC adaptor before connecting the LAN cable. The AC adaptor must remain connected during LAN use. If you disconnect the AC Adaptor while the computer is accessing a LAN, the system may hang up.

  • Page 113: Computer Handling

    Operating Basics Disconnecting the LAN cable To disconnect the LAN cable, follow the steps as detailed below: Make sure the LAN Active indicator (yellow LED) is out before you disconnect the computer from the LAN. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector.

  • Page 114: Moving The Computer

    Operating Basics Never spray cleaner directly onto the computer or let liquid run into any part of it. Never use harsh or caustic chemical products to clean the computer. Use the cleaning cloth to wipe away dust, fingerprints and similar from the keyboard, palm rest and other parts.

  • Page 115: Chapter 5 The Keyboard

    The Keyboard Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.

  • Page 116: Function Keys: F1

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
  • Page 117 The Keyboard Sleep: Pressing Fn + F3 switches the system to Sleep Mode. Hibernate: Pressing Fn + F4 switches the system to Hibernation Mode. Output: Pressing Fn + F5 changes the active display device. To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.

  • Page 118: Windows Special Keys

    FN Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an "F Number" key. To start the TOSHIBA Accessibility utility, click Start...

  • Page 119: Desktop-Style Keyboard

    The Keyboard Desktop-style Keyboard The Qosmio X300 Series comes with a "desktop-style" keyboard built into it. This means it is full-sized and features a full set of numeric function keys (also known as calculator keys) on the right-hand side. Unlike other notebooks computers with smaller keyboards, there is no "Numeric Mode"...

  • Page 120: Power

    Power Chapter 6 Power The computer's power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging and changing batteries, tips for saving battery power, and information on the different power-up modes.

  • Page 121: Power Indicators

    Power Power on Power off (no operation) AC adaptor Battery charge • Operates is above low • LED: Battery off connected battery trigger DC IN off point Battery charge • Operates is below low • LED: Battery flashes battery trigger amber point DC IN off...

  • Page 122: Battery Types

    Power DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: Indicates the AC adaptor is connected and is correctly supplying power to the computer. Flashing amber Indicates a problem with the power supply.
  • Page 123 The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User's Manual.

  • Page 124: Care And Use Of The Battery Pack

    Power The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.

  • Page 125: Charging The Batteries

    - the Battery indicator will glow amber while the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger. Time The following table shows the approximate time required to fully charge a discharged battery.

  • Page 126: Monitoring Battery Capacity

    Power The Battery indicator may show a rapid decrease in battery operating time when you try to charge a battery under the following conditions: ■ The battery has not been used for a long time. ■ The battery has completely discharged and been left in the computer for a long time.

  • Page 127: Retaining Data With Power Off

    Power ■ How much charge the battery contained to begin with. ■ How you use optional devices, such as a PC Cards, to which the battery supplies power. ■ Whether you enable Sleep Mode, which can conserve battery power if you are frequently turning the computer off and on.

  • Page 128: Replacing The Battery Pack

    Power 5. Charge the battery pack until the Battery indicator glows blue. ■ If you have extra battery packs, rotate their use. ■ If you will not be using the system for an extended period, for example for more than one month, remove the battery pack from the computer. ■...
  • Page 129 Power Battery Safety Lock Battery Pack Releasing the battery pack (1) 6. Slide and hold the battery release latch (1) to disengage the battery pack and then remove it from the computer (2). Battery Safety Lock Battery Pack Releasing the battery pack (2) To install a battery, follow the steps as detailed below: 1.

  • Page 130: Toshiba Password Utility

    Step 2 Securing the battery pack 3. Turn your computer over. TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set by the TOSHIBA Password Utility function are different from the Windows password.

  • Page 131: Supervisor Password

    ■ If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held...

  • Page 132: Power-Up Modes

    Power Starting the computer by password If you have already registered a password, there are two ways to start the computer: ■ Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Power- on Security.

  • Page 133: Panel Power On/Off

    Power Hot keys You can use the Fn + F3 hot key to enter Sleep Mode or Fn + F4 to enter Hibernation Mode - please refer to Chapter 5, The Keyboard for further details. Panel power on/off You can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it.

  • Page 134: Chapter 7 Hw Setup

    Accessing HW Setup Start, point to All Programs, point to TOSHIBA, point to Utilities and click HWSetup. HW Setup Window The HW Setup window contains the following tabs: General, Password,Display, Boot Priority, Keyboard, LAN, and USB.

  • Page 135: Boot Priority

    HW Setup Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer's display settings for either the internal LCD screen or for an external monitor. This option is depending on the model you purchased. Power On Display This option allows you to select the display to be used when the computer is switched on.

  • Page 136: Usb Sleep And Charge Function

    HW Setup Enabled Enables the Wake-up on Keyboard feature. Disabled Disables the Wake-up on Keyboard function (Default). USB KB/Mouse Legacy Emulation You can use this option to enable or disable USB keyboard/mouse legacy emulation so that, even if your operating system does not support USB devices, you can still use a standard USB mouse and keyboard - to achieve this you should set the appropriate option(s) to Enabled.
  • Page 137 HW Setup ■ When "USB Sleep and Charge function" is set to [Enabled], USB bus power (DC5V) will be supplied to compatible ports even when the power of the computer is turned OFF. USB bus power (DC5V) is similarly supplied to the external devices which are connected to the compatible ports.
  • Page 138 HW Setup Wake-up on LAN This feature lets the computer's power be turned on when it receives a wakeup signal from the LAN. Enabled Enables Wake-up on LAN. Disabled Disables Wake-up on LAN (Default). The Wake-up on LAN function consumes power even when the system is off.

  • Page 139: Chapter 8 Optional Devices

    Optional devices can expand the computer's capabilities and its versatility. This chapter describes the connection or installation of the following devices which should be available from your reseller or TOSHIBA dealer: To connect optional devices (such as USB device or External monitor) to the computer, be sure to check the shape and orientation of the connector before connecting.

  • Page 140: Expresscard

    The computer is equipped with a single ExpressCard slot into which any ExpressCard device that meets industry standards, either manufactured by TOSHIBA or another vendor, can be installed. The slot supports hot plug connection and utilizes the PCI Express interface that supports the reading and writing of data at a theoretical maximum rate of 2.5 Gbps.

  • Page 141: Removing An Expresscard

    Optional Devices Removing an ExpressCard To remove an ExpressCard, follow the steps as detailed below. 1. Open the Safely Remove Hardware icon on the Windows Task Bar. 2. Point to ExpressCard and click the left Touch Pad control button. 3. Press the ExpressCard to partially extend it out of the computer. If the ExpressCard is not inserted all the way into the computer, the eject button may not cause it to pop out sufficiently to allows it to be grasped.

  • Page 142: Bridge Media Slot

    Optional Devices Bridge media slot The computer is equipped with a Bridge media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.

  • Page 143: Memory Media

    Optional Devices Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC memory card SD/SDHC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.

  • Page 144: Memory Card Care

    Optional Devices Media care Observe the following precautions when handling the card. Card care ■ Do not twist or bend cards. ■ Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid. ■...

  • Page 145: Inserting A Memory Media

    Optional Devices Inserting a memory media In order to use the computer's Bridge media slot, open the right side cover first. The following instructions apply to all types of supported media devices. To insert a memory media, follow the steps as detailed below: 1.

  • Page 146: Additional Memory Module

    Optional Devices Memory media Bridge media slot Removing memory media ■ Make sure the Bridge Media slot indicator is out before you remove the memory media or turn off the computer’s power. If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.

  • Page 147: Installing A Memory Module

    Optional Devices ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. a. The computer is turned on. b. The computer was shut down in either Sleep or Hibernation Mode.
  • Page 148 Optional Devices 3. Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power, if required). 4. Loosen securing the memory module cover in place - please note that this screw is attached to the cover in order to prevent it from being lost. 5.

  • Page 149: Removing A Memory Module

    Optional Devices ■ Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury. ■...

  • Page 150: Battery Packs

    Optional Devices Take care to ensure that the memory module cover is firmly closed. 9. Install the battery pack - refer to Replacing the battery pack section in Chapter 6, Power, if required. 10. Turn your computer over. Battery Packs You can increase the portability of the computer with additional battery packs so that, if you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.
  • Page 151 Optional Devices USB connector Insert this connector into one of the free USB ports of your computer. Disk-In-Use Indicator This indicator glows when the floppy diskette is being accessed. Floppy diskette slot Insert a floppy diskette into this slot. Eject button When a floppy diskette is fully seated in the drive, the eject button will pop out.

  • Page 152: Esata (External Serial Ata)

    Optional Devices USB port USB connector Connecting the USB floppy diskette drive If you connect the USB floppy diskette drive after the computer has already been turned on, it will take about ten seconds for it to be recognized by the computer. Do not attempt to disconnect and reconnect the drive before this period has elapsed.

  • Page 153: Disconnecting An Esata Device

    Optional Devices eSATA cable eSATA/USB combo port Connecting an eSATA cable to the USB (eSATA combo) port ■ A connected eSATA device may not be recognized if it is connected to the computer's eSATA/USB combo port while the computer is in Sleep Mode or Hibernation Mode.

  • Page 154: External Monitor

    Optional Devices External monitor An external analog monitor can be connected to the computer's external monitor port, with the computer supporting WSXGA video mode. In order to connect a monitor, follow the steps as detailed below: 1. Turn the computer's power off. 2.

  • Page 155: Connecting The Hdmi Out Port

    Optional Devices As the port operation of all HDMI (High-Definition Multimedia Interface) monitors have not been confirmed, some HDMI monitors may not function properly. Connecting the HDMI out port 1. Plug one end of the HDMI cable into the HDMI out port of the HDMI device.
  • Page 156 Some models are supported with the REGZA Link. Using REGZA Link (PC Control) Toshiba notebooks with REGZA Link include a Toshiba utility dedicated to take advantage of its capabilities which can allow you to: ■ Use the TV remote control to output the computer screen onto the TV screen.

  • Page 157: I.link (Ieee1394)

    With regard to this, there is a particular risk that some frames will be deleted in the case of digital video transfer - TOSHIBA assumes no liability for such loss of data.

  • Page 158: Security Lock

    Optional Devices Connecting 1. Make sure the connectors are properly aligned before you plug the i.LINK (IEEE1394) cable into the computer. i.LINK (IEEE1394) port i.LINK (IEEE1394) connector Connecting the i.LINK (IEEE1394) port 2. Plug the other end of the cable into the i.LINK device. Please take note of the following when you use i.LINK devices: ■...

  • Page 159: Connecting The Security Lock

    Optional Devices Connecting the security lock In order to connect a security cable to the computer, follow the steps as detailed below: 1. Turn the computer so its left hand side faces you. 2. Align the security cable with the 'lock hole' and secure it in place. Security lock slot Security lock User’s Manual...

  • Page 160: Troubleshooting

    Troubleshooting Chapter 9 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.

  • Page 161: Analyzing The Problem

    Troubleshooting ■ Make sure all options are configured properly in the computer's setup program and that all required driver software has been loaded (please refer to the documentation provided with the option for further information on its installation and configuration). ■...
  • Page 162 Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.

  • Page 163: Hardware And System Checklist

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Priority option is set within the TOSHIBA HW Setup program. User’s Manual...

  • Page 164: Overheating Power Down

    If any of the following conditions are present, the self test has failed: ■ The computer stops and does not proceed to display information or messages except for the TOSHIBA logo. ■ Random characters appear on the screen and the system does not function normally.

  • Page 165: Ac Power

    Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN indicator. Please refer to Chapter 6, Power for further information. Problem Procedure AC adaptor doesn’t Check the connections to make sure that the power the computer power cord/adaptor is firmly connected to the...

  • Page 166: Real Time Clock

    Press [F2] 3. Press [F2] to set the time in [System Time]. key to set Date/Time. Password Problem Procedure Cannot enter password Please refer to the TOSHIBA Password Utility section in Chapter 6, Power for further information. User’s Manual...

  • Page 167: Internal Display Panel

    Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 168: Hard Disk Drive

    ROM in the optical disc drive - if so remove it and try to start the computer again. If this has no effect, check the Boot Priority setting within the TOSHIBA HW Setup utility - please refer to the Boot Priority...
  • Page 169 Troubleshooting Problem Procedure Check whether the CD, or DVD is dirty - if it is, wipe it with a clean cloth lightly dipped in water or a neutral cleaner. Please refer to the Operating Basics section in Chapter 4 for further details on cleaning the media.
  • Page 170 Troubleshooting ExpressCard For further information, please refer to Chapter 8, Optional Devices. Problem Procedure ExpressCard error Remove the ExpressCard from the computer and occurs then reinsert it in order to ensure it is firmly connected. In the event that the ExpressCard is attached to an external peripheral device, ensure that this connection is properly made.

  • Page 171: Xd Picture Card

    Troubleshooting Memory Stick/Memory Stick PRO/Memory Stick PRO Duo For further information, please refer to Chapter 8, Optional Devices. Problem Procedure Memory Stick/Memory Remove the Memory Stick/Memory Stick Stick Duo/Memory Stick Duo/Memory Stick PRO/Memory Stick PRO Duo PRO/Memory Stick from the computer and then reinsert it in order to PRO Duo error occurs ensure it is firmly connected.

  • Page 172: Infrared Receiver Window

    Troubleshooting MultiMediaCard For further information, please refer to Chapter 8, Optional Devices. Problem Procedure MultiMediaCard error Remove the MultiMediaCard from the computer occurs and then reinsert it in order to ensure it is firmly connected. If the problem persists, then you should refer to the documentation supplied with your MultiMediaCard for further information.

  • Page 173: Usb Mouse

    Troubleshooting Problem Procedure Double-tapping does In this instance, you should initially try changing not work the double-click speed setting within the Mouse Control utility. 1. To access this utility, click Start Control Panel Hardware and Sound Mouse icon. 2. Within the Mouse Properties window, click the Buttons tab.
  • Page 174 Troubleshooting Problem Procedure Remove the mouse from the computer and then reconnect it to a free USB port it in order to ensure it is firmly attached. Double-clicking does In this instance, you should initially try changing not work the double-click speed setting within the Mouse Control utility.

  • Page 175: Fingerprint Sensor

    USB, you are still able to use a USB mouse and/or USB keyboard by setting the USB KB/Mouse Emulation option within the Enabled TOSHIBA HW Setup utility to If you are still unable to resolve the problem, contact your reseller, dealer or service provider. User’s Manual...
  • Page 176 Troubleshooting USB Sleep and Charge function For more information and settings, please refer to the USB Sleep and Charge function section in Chapter 7, Setup. Problem Procedure I cannot use the "USB The setting of "USB Sleep and Charge function" Sleep and Charge may be [Disabled].

  • Page 177: Esata Device

    Troubleshooting Problem Procedure External devices Some external devices may not work when connected to the connected to a compatible port when the "USB compatible ports do not Sleep and Charge function" is [Enabled]. work when connected Reconnect the external device after turning ON to a compatible port.

  • Page 178: Memory Expansion

    Troubleshooting Memory expansion Please also refer to Chapter 8, Optional Devices, for further information on installing and removing memory modules. Problem Procedure If there is a memory In the event of Power indicator flashes when the malfunction, the Power computer is turned on you should initially ensure indicator will repeatedly that the installed memory module(s) are flash (on for...
  • Page 179 Troubleshooting Problem Procedure Check within the Windows Device Manager application to ensure the sound function is enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider. External monitor Please also refer to Chapter 8, Optional Devices, and to the documentation supplied with your monitor for further information.
  • Page 180 Troubleshooting Modem This information is applicable to the models equipped with a built-in modem. Problem Procedure Communication Make sure the computer's internal modem software can’t initialize settings are correct - please refer to the Phone modem and Modem Options link within the Windows Control Panel.
  • Page 181 Troubleshooting Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB. Wake-up on LAN does Make sure the AC adaptor is connected. The not work Wake-up on LAN function consumes power even when the system is off.

  • Page 182: Video Playback

    Troubleshooting i.LINK (IEEE1394) device Problem Procedure i.LINK device does not Check that the cable connecting the external function device to the computer is firmly attached. Check to ensure that power is being supplied to the device and that the device is turned on. Reinstall the drivers required for the device - this can be achieved by clicking Start, Control Panel, Hardware and Sound and then clicking...

  • Page 183: Toshiba Support

    Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.

  • Page 184: Chapter 10 Legal Footnotes

    Legal Footnotes Chapter 10 Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.

  • Page 185: Memory (Main System)*2

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 186: Hard Disk Drive (Hdd) Capacity*4

    Legal Footnotes After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see the accessories information that shipped with your computer.

  • Page 187: Non-Applicable Icons*8

    Legal Footnotes Non-applicable Icons Certain computer chassis are designed to accommodate all possible configurations for an entire product series. Therefore, please be aware that your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis.

  • Page 188: Specifications

    Specifications Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Size: 412mm (w) × 306mm (d) × 43.2mm/62.5mm (h) (not including parts that extend beyond the main body) Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% Non-operating -20°C (-4°F) to 65°C (149°F)
  • Page 189 Specifications Built-in Modem This information is applicable to the models equipped with a built-in modem. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications...

  • Page 190: Display Controller And Video Modes

    Display Controller and Video modes Appendix B Display Controller and Video modes Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Due to the display panel's increased resolution, lines may appear broken in when displaying images in full-screen text mode.

  • Page 191: Wireless Lan

    Wireless LAN Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor PCI Express Mini Card Compatibility ■ IEEE 802.11 Standard for Wireless LAN ■...

  • Page 192: Supported Frequency Sub-Bands

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 193 Wireless LAN ■ For Wireless LAN cards installed in wireless clients that operating in a peer-to-peer mode, the card will use the default channel 10. ■ In a Wireless LAN Access Point, the Wireless LAN card will use the factory-set default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device.
  • Page 194 Wireless LAN ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN module will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.

  • Page 195: Appendix D Bluetooth Wireless Technology Interoperability

    Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special interest Group. ■ When you use Bluetooth Adaptor from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth Adaptor from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz...

  • Page 196: Bluetooth Wireless Technology And Your Health

    Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

  • Page 197: Ac Power Cord And Connectors

    AC Power Cord and Connectors Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 198 AC Power Cord and Connectors The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe. United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency Canada CSA approved User’s Manual...

  • Page 199: Appendix F Usage Restrictions

    This configuration is designed to work with a signal from a conventional (standard or analog) TV antenna. ■ TOSHIBA does not guarantee that signals received by satellite or cable TV receivers will work properly and does not provide technical support for them.

  • Page 200: Appendix G If Your Computer Is Stolen

    What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 201: Toshiba Theft Registration

    If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Qosmio X300) Model number: (e.g. PSA30EYXT) Serial number: (e.g.

  • Page 202: Glossary

    Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc Read Only Memory CD-RW: Compact Disc ReWritable...
  • Page 203 Glossary IDE: integrated drive electronics I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory...
  • Page 204 Glossary adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer. This term also refers to the add-in circuit cards that control external devices, such as video monitors and magnetic tape devices.
  • Page 205 Glossary binary: The base two number system composed of zeros and ones (off or on), used by most digital computers. The right-most digit of a binary number has a value of 1, the next a value of 2, then 4, 8, 16, and so on.
  • Page 206 Glossary CD-R: A Compact Disc Recordable disc can be written once and read many times. See also CD-ROM. CD-RW: A Compact Disc ReWritable disc can be rewritten many times. See also CD-ROM. character: Any letter, number, punctuation mark, or symbol used by the computer.
  • Page 207 Glossary controller: Built-in hardware and software that controls the functions of a specific internal or peripheral device (e.g. keyboard controller). co-processor: A circuit built into the processor that is dedicated to intensive math calculations. CPS: Characters Per Second. Typically used to indicate the transmission speed of a printer.
  • Page 208 Glossary display: A CRT, LCD, or other image producing device used to view computer output. documentation: The set of manuals and/or other instructions written for the users of a computer system or application. Computer system documentation typically includes procedural and tutorial information as well as system functions.
  • Page 209 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 210 Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 211 Glossary I/O: Input/output. Refers to acceptance and transfer of data to and from a computer. I/O devices: Equipment used to communicate with the computer and transfer data to and from it. IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps.
  • Page 212 Glossary main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. menu: A software interface that displays a list of options on the screen. Also called a screen.
  • Page 213 Glossary OCR: Optical Character Recognition (reader). A technique or device that uses laser or visible light to identify characters and input them into a storage device. online state: A functional state of a peripheral device when it is ready to receive or transmit data.
  • Page 214 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 215 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 216 Glossary Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer. VGA: Video Graphics Array is an industry standard video adaptor that lets you run any popular software. volatile memory: Random access memory (RAM) that stores information as long as power is supplied to the computer.
  • Page 217 6-9 Bluetooth, 1-8, 4-44 Fingerprint Sensor Bluetooth Stack for problems, 9-16 Windows by Function keys, 5-2 Toshiba, 1-13 problems, 9-22 Bridge media slot, 1-7, 2-5, 8-4 Graphics controller, 1-6 indicator, 2-11 using, 8-4 Hard disk drive automatic power off, 1-10...
  • Page 218 Index HW Setup Memory Stick/Memory Stick accessing, 7-1 PRO/Memory Stick PRO Duo general, 7-1 problems, 9-12 Modem, 1-8, 4-39 connecting, 4-41 i.LINK, 1-7, 2-5 disconnecting, 4-42 connecting, 8-20 problems, 9-21 disconnecting, 8-20 properties menu, 4-40 precautions, 8-19 region selection, 4-40 problems, 9-23 Moving the computer, 4-49 Indicators...
  • Page 219 Modem, 9-21 Stereo speakers, 2-9 MultiMediaCard, 9-13 Overheating power down, TOSHIBA Assist, 1-13 Password, 9-7 TOSHIBA ConfigFree, 1-14 Pointing device, 9-13 TOSHIBA Disc Creator, 1-14, Power, 9-5 4-23 SD/SDHC memory card, TOSHIBA PC Diagnostic Tool, miniSD/microSD 1-12 Card, 9-11 TOSHIBA support, 9-24...
  • Page 220 Index USB floppy diskette drive, 8-12 problems, 9-10 using, 8-13 Video modes, B-1 Video RAM, 1-3 Web Camera, 1-7 Wireless communication, 4-42 indicator, 4-46 Wireless communication switch, 1-9, 2-1, 4-45 Wireless LAN, 1-9, 4-43 problems, 9-22 xD picture card problems, 9-12 User’s Manual Index-4...

This manual is also suitable for:

Pqx31u-00u00cQosmio x300

Table of Contents