Toshiba Qosmio X300 Series User Manual page 55

NOTE
11
latch
key
(Sample Illustration) Aligning the memory module with the socket
12
(Sample Illustration) Inserting the memory module into the socket
Downloaded from LpManual.com Manuals
For this model Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
Pick up the memory module by its sides, avoiding any contact
with its connector. Position the module toward the socket,
aligning the connector's notch with the matching key in the
socket.
notch
Firmly press the memory module into the memory slot's socket
at approximately a 30-degree angle (to the horizontal surface
of the computer).
Getting Started
Adding memory (optional)
connector
latch
55