RAM 1500 2014 User Manual page 65

7. Wait for the beep, and then dictate any message up to 140 characters. If you
exceed 140 characters, you will hear the following prompt: "Message was too
long; your message will be truncated."
8. Uconnect will then repeat the message back to you.
®
9. Uconnect will prompt you: "To add to your message, say "Continue"; To delete
®
the current message and start over, say "Start Over"; to send the current message,
say "Send"; to hear the message again, say "Repeat".
10. If you are happy with your message and would like to send it, wait for the beep
and say "Send".
11. Uconnect ® will then say "Sending your message."
Sample Commands For Voice Text Reply And Voice Texting
Example Command
"Text John Smith"
"Text 123 - 456 - 7890"
"Show messages"
"Listen to/view (message number four,
for example)"
"Reply"
"Forward text/message to "John Smith"
"Forward text/message to
"123 - 456 - 7890"
Uconnect® Access Via Mobile (If Equipped — Available On
Uconnect® 8.4A And Uconnect® 8.4AN)
Uconnect Access via Mobile offers additional apps such as Aha™, iHeartRadio,
®
Pandora ® and Slacker Radio. It uses your smartphone's existing data plan to access
Uconnect System-enabled apps, which you can control using both your touchscreen
®
and steering wheel controls. Customer's data plan charges will apply.
To get started using Via Mobile apps, first register your Uconnect
where you'll be guided through the setup of your Via Mobile (requires a compatible
Android or iPhone
®
for more information.
smartphone). Please refer to "Uconnect
ELECTRONICS
Action
Send a message to specific contact in
address book
Send 123 - 456 - 7890 a message from
your phonebook
See recent text messages listed by
number on Uconnect
Hear messages or read it on
Uconnect
Send a voice text reply to a
current message
Forward current text to specific contact
in address book
Forward current text to specific
phone number
®
® screen
® screen
® Access system
Access Registration"
63