Undock Button Settings - Dell Alienware Graphics Amplifier User Manual

Undock Button Settings

This section will provide procedure on how to set the computer's behavior
when the undock button on the graphics cable is pressed.
1 Launch AlienAdrenaline.
Windows 8.1:
a) On the Start screen, browse to Apps and click the Alienware
Command Center tile.
b) In the Alienware Command Center window, click AlienAdrenaline.
Windows 7:
Click Start → All Programs → Alienware → Command Center →
AlienAdrenaline.
2 On the AlienAdrenaline window, click Graphics Amplifier → Undock
Button.
NOTE: Save and close all open files and exit all open applications
before pressing the undock button on the graphics cable.
3 Use the following options to configure the computer's behavior when the
undock button on the graphics cable is pressed:
– Always Prompt Options - A message box appears asking you to either
restart or shutdown the computer.
– Restart - The computer restarts.
– Shutdown - The computer is shutdown.
33