Steps
1. Insert the right-side front-cover tabs into the corresponding slots on the chassis.
2. Push the left-side of the front cover towards the chassis, snapping the slots into position.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
3. Remove the
front
cover.
About this task
The following image(s) indicate the location of the power button and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
cover.
computer.
computer.
Removing and installing components
17