Transfer/Separation Section; Detaching And Refitting The Transfer Roller And Separation Brush Unit - Kyocera FS-3040MFP Service Manual

1-5-7 Transfer/separation section

(1) Detaching and refitting the transfer roller and separation brush unit

Procedure
1.
Remove the developing unit.
(See page 1-5-25)
2.
Remove the drum unit
(See page 1-5-26)
3. Slide the paper chute guide and unhook
the hooks.
4. Remove the paper chute guide.
5. Remove the transfer roller's shaft from
the both bushes.
.
Hook
Paper chute guide
Transfer roller
Transfer roller
Shaft
Bush
1-5-27
Hook
Hook
Figure 1-5-43
Shaft
Transfer roller
Figure 1-5-44
2LW/2LX
Hook
Bush