GMC 1990 Light Truck Repair Manual page 117

f
A. Hammer
B. Punch
220. Retaining Ring
Figure 2— Unseating the Retaining Ring
equivalent should be used. DO NOT use brake fluid,
automatic transmission fluid, or other non-approved flu­
ids.
DISASSEMBLY
0
Remove or Disconnect (Figures 2 through 11)
Tools Required:
J 4245 Internal Snap Ring Pliers
J 21552 Ball Retainer Tool
J 8524-1 Bearing Remover
F1805
Figure 5— Removing the Pitman Shaft Bearing
J 7624 Spanner Wrench
J 7079-2 Driver
J 6278 Pitman Shaft Bearing Puller
J 21552 Rack Piston Arbor
1. Retaining Ring (220) (figure 2).
• Pry retaining ring out of the housing groove
with a screwdriver (figure 3).
POWER STEERING 3B3-3