Reference; Maintenance; Special Functions; Clear Memory Channels - M-tech MT-500 Owner's Handbook Manual

9. REFERENCE

9.1 Maintenance

The MT-500 VHF transceiver is produced with proven processes and current
solid state technology. With reasonable care, your MT-500 will have a long
useful life.
The following precautions will prevent damage to the transceiver.
• Never press the PTT button unless an antenna or proper dummy load is
connected to the antenna jack.
• Do not operate the transceiver if the power source is not within the speci-
fied range of 11 to 16 Vdc.
• Replace the antenna and/or coaxial cable if damaged in any way or
severely weathered.
• Avoid continuous direct sunlight on the LCD.
• Avoid overextending the microphone cable.
• Do not use solvents or harsh chemicals to clean the microphone, case-
work or LCD display.

9.2 Special Functions

Clear Memory Channels

Clears the channel bank for the Memory Scan function.
• Press and hold the

New Microphone

Initializes the keypad when a new microphone is installed.
• Press and hold the

Printer Operation

Initializes the Tx port for 4800 baud PC/printer interface.
• Press and hold the
www.Busse-Yachtshop.de
key while turning power On.
MEM
key on the microphone while turning power On.
1
key while turning power On.
16
email: info@busse-yachtshop.de
MT-500 55