Position Send - M-tech MT-500 Owner's Handbook Manual

• Use the SELECT/ENT knob or the microphone keys to select a working
channel. Four channel numbers appear in the display as suggested chan-
nels authorized for this type of call. Other channels may be used if autho-
rized in your area.
• Press the
CALL
of the display.
• Your transceiver is automatically set to the previously set working chan-
nel. Listen for voice replies from vessels which have received your call.
There is no DSC ACK reply to confirm that your call was received.
• Use the PTT button to continue voice communication. The Normal Com-
munication screen appears in the display.
• If there is no response to your call, press the
Communication screen appears in the display.

Position Send

Positin Send can send your Lat/Lon position to another vessel that is listed in
your calling directory.
To make a Position Send:
• Press the
CALL
• Use the SELECT/ENT knob to select the DIRECTORY topic.
• Push the SELECT/ENT knob or press the
appears in the display.
• Use the SELECT/ENT knob to select the desired vessel name.
Note: The MMSID's for each entry do not appear in the list.
• Press the
CALL
46 MT-500
www.Busse-Yachtshop.de
SET CH
06 08 72 77
GROUP MMSID
087654321
Set Channel
key. The call is sent and SENT. appears in the lower line
key. The DSC calling menu appears in the display.
LAST CALL
>DIRECTORY
ALL SHIP'S
INDIVIDUAL
DSC Directory
key. The INDIVIDUAL call screen appears in the display.
email: info@busse-yachtshop.de
INT
key. The Normal
END
INT
key. The directory list
CALL