Atis - M-tech MT-500 Owner's Handbook Manual

Only one entry attempt is permitted. A warning is displayed after the first
attempt and ATIS ID entry is blocked. CALL YOUR DEALER FOR ASSIS-
TANCE.
To enter your ATIS ID:
• Press and hold the
• Rotate the SELECT/ENT knob to position the cursor on the ATIS ID topic.
• Push the SELECT/ENT knob. The ATIS ID menu appears in the display.
• Push the SELECT/ENT knob. The cursor after "9" is blinking. The first
numeral is always "9".
• Use the SELECT/ENT knob or microphone keys 0~9 to enter the rest of 9
numerals.
• When the last numeral is selected, push the SELECT/ENT knob or
key.
• Push the SELECT/ENT knob or
briefly in the lower line of the display completing the entry.
• Press the
16
If you use the MT-500 without entering ATIS ID, MT-500 will not be changed
to the transmit mode. In this situation, an error beep sounds even if press the
PTT key of microphone. TX indication does not appear in the display.
54 MT-500
www.Busse-Yachtshop.de
CAUTION NOTE
key. Menu topics appear in the display.
CALL
TIS ID
9000000000
PUSH ENTER
TO CH NGE.
ATIS ID Set Screen
key to rethrn to the Main display.
NOTE
email: info@busse-yachtshop.de
key again. STORED OK appears
ENT
ENT