Gps Alert; Ch Name - M-tech MT-500 Owner's Handbook Manual

GPS ALERT

Provides ON/Off settings for GPS Alert. It is usually set to On. If data from
your GPS navigation receiver is lost, 3 quick error beeps are sounded and
**GPS OFF is displayed on the second line of the Normal Communication
screen, alternately with the date & time and channel name (alternately with
MEM CHANNEL and channel name, in case that displayed channel is memory
channel). Press the
To set the GPS Alert:
• Press and hold the
• Rotate the SELECT/ENT knob to position the cursor on the GPS ALERT
topic.
• Push the SELECT/ENT knob. The GPS ALERT menu appears in the
display.
• Rotate the SELECT/ENT knob to select ON or OFF.
• Push the SELECT/ENT knob to store the setting and exit the menu.
Irrespective of this setting, 4 hours and 23.5 hours alert timer is effective. See
the 7. DSC OPERATION section.

CH NAME

Each channel is displayed with default channel name on the second line of
the Normal Communication screen, alternately with the date & time (alter-
nately with MEM CHANNEL, in case that channel is memory channel). You
can edit these channel names as you like.
To edit the channel names:
• Select the channel which you want to edit the channel name.
• Press and hold the
• Use the SELECT/ENT knob to position the cursor on the CH NAME topic.
• Push the SELECT/ENT knob. The CH NAME screen appears in the dis-
play.
32 MT-500
www.Busse-Yachtshop.de
or key to silence the 3 quick error beeps.
16 END
key. Menu topics appear in the display.
CALL
PS ALERT
>ON
OFF
GPS Alert menu
NOTE
key. Menu topics appear in the display.
CALL
email: info@busse-yachtshop.de
INT