Lamp - M-tech MT-500 Owner's Handbook Manual

• Push the SELECT/ENT knob. The DIRECTORY NAME/ID screen appears
presenting the name and MMSID for the selected directory entry. The
blinking cursor is positioned at the start of the entry's name.
• Push the SELECT/ENT knob or
line instead of a blinking square and moves to the first character position.
• Use the SELECT/ENT knob to move the underline cursor to the character
position needing change.
• Push the SELECT/ENT knob or
• Use the SELECT/ENT knob or microphone keys to change the contents of
the character to the new value.
• When new value is correct, press the SELECT/ENT knob or the
If more characters in the same line need changing, use the SELECT/ENT
knob or
ENT
character. If no more changes are desired on the same line, press and hold
the key to move the cursor back to the start of the line.
CALL
• When both the name and MMSID are correct, press and hold the
key to save the data and exit to the directory listing.

LAMP

Allows adjustment of illumination for the LCD display, keypad and micro-
phone keypad.
• Press and hold the
• Use the SELECT/ENT knob to position the cursor on the LAMP topic.
• Push the SELECT/ENT knob. The BRIGHTNESS adjust screen appears
in the display.
• Use the SELECT/ENT knob or microphone keys 0~3 to change the set-
ting.
www.Busse-Yachtshop.de
or key to move the blinking cursor to the next desired
EXIT
key. Menu topics appear in the display.
CALL
RIGHTNESS
LO HI
Brightness Control
key. The cursor becomes an under-
ENT
key. The blinking cursor appears.
ENT
USA INT
email: info@busse-yachtshop.de
key.
ENT
CALL
MT-500 25