Phone Setup; Call Waiting - Siemens C62 User Manual

Phone setup

¢m¢
Phone setup
§Menu§
¢
Select function.

Call waiting

If you are registered for this service,
you can check whether it is set and
activate/deactivate it.
Hide ID
If activated, your phone number will
not appear on the recipient's display
(depending on the service provid-
ers).
Divert
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
Set up call divert (example):
Unanswered
G
Select
(covers the conditions
Not reachable,
Busy)
Press and select Set. Enter
§Select§
the phone number to
which the call will be di-
verted.
Press. After a short pause,
§OK§
the setting is confirmed
by the network.
L
L
L
Unanswered
No reply,
Setup
All calls
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress.
If Call waiting
you will hear the call waiting tone
during a call.
Check status
You can check the current divert sta-
tus for all conditions.
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
Divert all calls. Symbol in
the top line of the display
in standby mode.
is activated (page 69),
Condition set
Not set.
Status unknown
(e.g. with a new SIM
card).
69
L