Lincoln Electric VANTAGE 520 SD Operator's Manual page 13

VANTAGE ® 520 SD
EXHAUST OUTLET PIPE
Remove cap from DPF outlet pipe protruding from roof.
Using the clamp provided secure the exhaust outlet pipe to the
outlet tube with the pipe positioned such that it will direct the
exhaust in the desired direction away from the air intake. Tighten
using a 1/2"(13mm) socket or wrench.
SPARK ARRESTOR
Some federal, state or local laws may require that gasoline or
diesel engines be equipped with exhaust spark arresters when
they are operated in certain locations where unarrested sparks
may present a fire hazard.
The Diesel Oxidation Catalyst (DOC) on this engine qualifies as a
spark arrestor that meets local regulations.
(5/16-18x 1.25 HHCS) (2)
(LOCK WASHER) (2)
(MAIN WASHER) (2)
FIGURE A.2
INLET HOOD
MOUNTING BRACKET
AIR HOSE CLAMP
AIR CLEANER INSTALL
All parts below are shipped with the machine in a separate box
attached to the crate.(See Figure A.2)
• Remove cap from air intake hose.
• Tighten air hose clamp just below service indicator to hold
clamp while pushing air cleaner onto hose
place loosen air hose clamp slide down and tighten clamp.
• Install 2 hex head screws, washers using a 1/2" (13mm)
wrench or socket to mounting bracket securing air cleaner.
• Unclip air cleaner end cap and rotate "TOP" text to be at
approximately 9 o'clock position.
•
SERVICE INDICATOR
Air cleaner service indicator provides a Go/No-Go visual indi-
cation of useful filter service life.
(1)
Permissable to use a soap water solution as a lubricant to aid in hose
installation.
SERVICE INDICATOR
VACUATOR VALVE
EXHAUST OUTLET
CLAMP
A-5
INSTALLATION
(1) , once hose is in