Quick Start Guide - Tunstall ConnectMe Vi+ Installation And Programming Manual

Quick start guide

IMPORTANT: In order to function the home unit must be programmed correctly to a monitoring centre
or personal recipient (please see programming section).
Step 1 - Connecting the leads and adaptors
Please follow the steps below to plug the leads correctly into the home unit.
Step A – Plug the telephone lead ⓐ into the
home unit socket labelled LINE and the
telephone wall socket.
Step B – Plug the telephone adaptor ⓑ into
the home unit socket labelled  and then
plug all required telephones / equipment into
the telephone adaptor ⓑ using a multi socket
extension if required (not supplied). See page
8 for more details.
Step C – Plug the mains adaptor ⓒ into the
home unit socket labelled DC and then
connect to the mains power. Note – ensure
the mains power is switched on.
NOTE: Only use with the power adaptor supplied with the home unit (part numberT0910TUN). (The DL1
will have a new 12v adaptor. Not sure if this P/N is correct)
ConnectMe Tunstall Vi+ Installation and Programming Manual 7