The Lights On The Home Unit Indicate; The Led On The Personal Radio Trigger Indicates - Tunstall ConnectMe Vi+ Installation And Programming Manual

The lights on the home unit indicate

The lights on the home unit provide indications of its status based on the below.
Alarm Button (Red)
Red alarm button on
Red alarm button flashing
(1 every 4 seconds)
Red alarm button flashing
(1 every second)
Status Led (Green/Red)
Green LED on
(2 every second)
Red LED flashing
( 1every 4 seconds)
Red LED flashing
( 1 every second )
Red/Green flashing
No lights on
Home/Away Button
(Yellow)
Yellow LED on
Yellow LED off
Yellow LED flashing
(2 every second)

The LED on the personal radio trigger indicates

When the personal radio trigger is pressed, the red LED will light up. This is to
indicate that the button has been pressed. If the LED flashes when pressed this
indicates that the personal radio trigger battery is low and should be replaced. You
ConnectMe Tunstall Vi+ Installation and Programming Manual
Home Unit Status
Normal mode
Normal mode running on battery
(mains power off)
Alarm mode
Home Unit Status
Normal Mode
Low Internal Battery
Telephone line disconnected
Radio Blocking Detected
Unit powered down (if power is on
and connected then the unit may be
faulty)
Home Unit Status
Away Mode
Home Mode
Intruder entry/exit time period
13