9. IMPORTANT: To avoid damaging the
Crossbar (93), do not use power tools and
do not overtighten the #10 x 3/4" Screws (9).
Orient the Crossbar (93) as shown. Tighten all
four #10 x 3/4" Screws (9) about halfway into
the Handrails (87, 88). Then, slide the Crossbar
as far forward as possible, and tighten the four
Screws.
10. Attach the Console Frame (104) to the
Handrails (87, 88) with four 5/16" x 1 1/2" Bolts
(4) and four 5/16" Star Washers (11). Start all
four Bolts, and then tighten them.
9
9
88
10
104
4
11
11
9
93
4
11
88
87
87