Table of Contents
Advertisement
GHOST
Closing: In the reverse sequence
User Manual Status 04/2009 // Spec 2010
3.
In the case of quick-release levers for saddle post clamping: Turn the bolt at the
hexagonal socket (instead of the nut) in anti-clockwise direction to release the
saddle post.
1.
If the quick-release axle was completely removed from the hub, push it through
the hub from the left-hand side (as seen in riding direction).
2.
Place the spring and screw nut onto the axle. Now screw the screw nut on to
the right-hand end now protruding out of the hub in clockwise direction.
7.75
Hide quick links:
Advertisement
Table of Contents
