Ghost Bike User Manual page 110

GHOST
User Manual Status 04/2009 // Spec 2010
2. Shift to the smallest pinion of the sprocket assembly on the rear wheel (see
chapter 7.7).
•
To do this, raise the bike at the rear, actuate the corresponding switch and
turn the crank in drive direction by hand until the chain is engaged on the
smallest pinion.
3. Loosen the wheel hubs.
•
Open the quick-release lever on your wheel (see also chapter 7.9 "Quick-
release levers").
•
Back off the lock nut until it is just still on the axle.
4. Remove the wheels from frame and forks.
•
Front wheel: Pick up the bike with the handlebars and pull the wheel out of
the fork ends of the front-wheel forks.
•
Rear wheel: Raise the bike at the rear end and push the gear shift
mechanism to the rear. In this position, push the rear wheel with alight
pressure towards the opening in the frame.
10.110