GHOST
User Manual Status 04/2009 // Spec 2010
Move the saddle to the desired position.
•
For saddle clamps with one bolt: Tighten the clamping bolt to the prescribed
torque again. Ensure that all loosened parts engage with one another again
correctly.
•
For saddle clamps with two bolts: Turn the bolts alternately by a quarter to
half a turn until the prescribed torque is reached.
•
For details of the prescribed tightening torque, please refer to the table in
chapter 3.2.
•
Different tightening torques may be specified for some saddle posts. If these
are not listed in the table or directly on the saddle post, please contact your
dealer.
7.57