GHOST
User Manual Status 04/2009 // Spec 2010
4.
Ensure that the brake blocks contact the rim flank correctly when the brakes are
actuated.
5.
On the front wheel with hub dynamo (if installed):
•
Reconnect the plug connector between hub dynamo and wiring.
6.
Check the installation:
•
Actuate the brakes.
•
If a brake block or brake pad continues to be in contact with the wheel rim or
brake discs, this can indicate incorrect mounting of the hub in the fork ends.
•
In this case release the quick-release lever again, check and correct the
position of the hub and close the quick-release lever again.
•
The brake (with rim brakes) does not have to be opened for this. If this does
not improve the situation, contact your dealer immediately.
•
Ensure that the lighting system (if installed) is functioning correctly.
•
Ensure that the wheels do not touch either the mudguards or luggage rack
(if installed).
10.106