Pride RALLY 3 Owner's Manual page 19

REAR SECTION
The onboard battery charger, the charger power lead receptacle, the battery charger fuse, the batteries, the
electronic controller assembly, the main circuit breaker, the manual freewheel lever, and the motor/transaxle
assembly are located on the rear section of your scooter. See VIII. “Disassembly and Assembly” for
instructions on removing the rear shroud. The anti-tip wheels are at the rearmost part of your scooter. See
figure 7.
ONBOARD BATTERY
CHARGER
BATTERY CHARGER
FUSE
MOTOR/TRANSAXLE ASSEMBLY
Figure 7. Rear Section
Onboard Battery Charger
The onboard 3-amp battery charger converts household alternating current (AC) to direct current (DC) and
charges the batteries of your scooter. See V. “Batteries and Charging.”
n The charger is located behind the batteries and at the forward right corner of the rear section.
n The charger is a box with cooling fins on the exterior of its case.
n The charger power lead plugs into the battery charger by means of a receptacle located on the rear
section of your scooter, near the manual freewheel lever and the main circuit breaker reset button. See
figure 7.
Battery Charger Fuse
The fuse has been incorporated into your charger to protect it from damage in the event of an electrical
problem.
Rally
I V . Y O U R
ANTI-TIP WHEELS
R A L L Y
ELECTRONIC CONTROLLER
ASSEMBLY
MAIN CIRCUIT BREAKER
(RESET BUTTON)
BATTERIES
CHARGER POWER
LEAD RECEPTACLE
MANUAL FREEWHEEL
LEVER
19