Pride RALLY 3 Owner's Manual page 18

Key Switch
n Fully insert the key into the key switch to power up (turn on) your scooter.
n Pull the key out to power down (turn off) your scooter.
WARNING! If the key is removed from the key switch while your scooter is in motion, the electronic
brakes engage and your scooter comes to an abrupt stop!
Speed Adjustment Dial
This control dial allows you to preselect and limit your scooter’s top speed.
n The image of the tortoise represents the slowest speed setting.
n The image of the hare represents the fastest speed setting.
Throttle Control Lever
This lever allows you to control the forward and the reverse speed of your scooter up to the maximum
speed preset by the speed adjustment dial.
n Place your right hand on the right handgrip and your left hand on the left handgrip.
n Use your right thumb to push the right side of the lever to disengage your scooter’s brake and move
forward.
n Release the lever and allow your scooter to come to a complete stop before pushing the other side of the
lever to move in reverse.
n When the throttle is completely released, it automatically returns to the centre “stop” position and
engages your scooter’s brake.
Battery Condition Metre
This metre gives an approximate reading of your scooter’s battery voltage when the key is fully inserted
into the key switch and turned to the on position.
NOTE: To ensure the highest accuracy, the battery condition meter should be checked while operating
your scooter at full speed on a level surface.
Horn Button
n The key must be fully inserted into the key switch for the horn to be operational.
n This button activates a warning horn.
n Do not hesitate to use the warning horn when its use could prevent accident or injury.
Light Switch
This switch controls your scooter’s headlight system.
n Press this switch once to turn on the lights.
n Press it again to turn off the lights.
18
I V . Y O U R R A L L Y
Rally