Connection; Connection To A Television; Basic Connection - Panasonic DVD-S55 Operating Instructions Manual

Connection

Before connection
≥Disconnect the AC power supply cord.
≥Turn off all equipment and read the appropriate operating instructions.

Connection to a television

This page explains how to connect the unit to a television and set it
up so you hear the audio through the television's speakers.
To get the full benefit from the powerful multi-channel audio found on
DVDs, you should connect an amplifier and speakers.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
Connect your unit directly to your television.
Do not connect the unit through your video cassette recorder when
setting up your home entertainment system, because the picture may
not be played correctly due to the copy guard.
∫ For better pictures
Television's
COMPONENT
VIDEO IN
terminals
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive
output ( page 9) and provide a purer picture than the S VIDEO
OUT terminal. Connection using these terminals outputs the color
difference signals (P
order to achieve high fidelity in reproducing colors.The description of
the component video input terminals depends on the television or
monitor (e.g. Y/P
the same color.
≥When making this connection, ensure you connect the audio cables
to the corresponding audio input terminals on the television.
≥After making this connection, change the black level for a better
picture ( page 20, Video—Black Level Control).
Downloaded From Disc-Player.com Panasonic Manuals
6
AC IN
Video cable (not included)
/P ) and luminance signal (Y) separately in
B R
/P , Y/B-Y/R-Y, Y/C /C ). Connect to terminals of
B R B R
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables sold separately unless
otherwise indicated.

∫ Basic connection

Television
AUDIO VIDEO
IN IN
L
R
red white yellow
red white yellow
AUDIO OUT
DIGITAL AUDIO OUT
CENTER SURROUND FRONT L/L
(PCM/BITSTREAM)
L
SUB R
WOOFER SURROUND FRONT R/R
OPTICAL
5.1ch 2ch
Television's
S VIDEO IN
terminal
S video cable (not included)
S VIDEO OUT terminal
The S video terminal achieves a more vivid picture than
the VIDEO OUT terminal by separating the chrominance
(C) and luminance (Y) signals. (Actual results depend on
the television.)
≥When making this connection, ensure you connect the
audio cables to the corresponding audio input terminals
on the television.
Audio/video cable
(included)
You can connect the
audio cable to the 2-
channel audio input
terminals of an analog
amplifier or system
component to enjoy
stereo or Dolby Pro
Logic.
PONENT VIDEO OUT
COM
(480P/480I)
P
L Y
B
R P
R
VIDEO OUT S VIDEO OUT