Common Procedures; Entering A Password (Ratings); Digital Output - Panasonic DVD-S55 Operating Instructions Manual

CANCEL
MENU

Common procedures

See page 20 for menu and option details.
1
Press [SETUP] to show the menus.
≥The QUICK SETUP screen appears when you press [SETUP] the
first time after purchase (
2
Press [2, 1] to select the menu's tab.
The screen changes to display the menu.
Disc ,. Video ,. Audio ,. Display ,. Others
^------------------------------------------------------------------------J
3
Press [3, 4] to select the item you want to
change and press [ENTER].
4
Press [3, 4, 2, 1] to select the option and
press [ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
To exit the SETUP menu
Press [SETUP].
Downloaded From Disc-Player.com Panasonic Manuals
Í
SETUP
SLEEP SETUP
OPEN/CLOSE
A.SRD
1 2 3
AUDIO ONLY
4 5 6 Numbered
DEPTH ENH
buttons
7 8 9
GROUP CANCEL
0 S
10
PAUSE
DIRECT NAVIGATOR PLAY LIST
MENU
TOP
3
ENTER
ENTER
RETURN
RETURN
DISPLAY
Disc
SETUP
Audio
Subtitle Automatic
Menus
SELECT TAB
Ratings
Level 8
page 9).

Entering a password (Ratings)

[DVD-V]
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons.
≥If you enter a wrong number, press [CANCEL] to erase it.
2. Press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
3. Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD-Video that exceeds the ratings limit you
set, a message appears on the television.
Follow the on-screen instructions.

Digital output

[DVD-A] [DVD-V]
4 2 1
, , ,
You can change the following setting from the Setup menu when you have
connected equipment through this unit's DIGITAL AUDIO OUT terminal
(OPTICAL). Make sure "Digital Audio Output" is set to "On".
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
≥Select "Yes" if the equipment you connect cannot process signals with a
sampling frequency of 96 kHz or 88.2 kHz.
No (Factory preset):
Yes:
[Note]
≥Signals are converted to either 48 kHz or 44.1 kHz despite the above
English
settings if the signals have a sampling frequency of over 96 kHz, or the
disc has copy protection.
English
≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even
if they can handle 96 kHz. Read your equipment's operating instructions
for details.
Dolby Digital and DTS Digital Surround
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM. If not, signals the equipment
cannot process will be output by this unit, causing high levels of
noise which can damage your hearing and the speakers.
Output as 96 kHz or 88.2 kHz
Converted to 48 kHz or 44.1 kHz
21