Quick Start Guide; Choose Your Connection Type - Panasonic TX-15LV1 Operating Instructions Manual

Quick start Guide

1. Choose Your Connection Type

1. Connecting the TV directly to an aerial only
Connect the aerial lead into the TV aerial socket (
Aerial
(Not Supplied)
Aerial lead
Aerial
(Not Supplied)
RF OUT
RF IN
8
).
LCD TV
Aerial input socket
Clamper
Aerial socket
or
LCD TV
Aerial
Input
socket
Clamper
21-pin SCART cable
(Not Supplied)
VCR
Mains
Socket
Using the Cable Cover
1. Installing the cable clamp.
2. Using the cable clamp
Open the cable clamp
and pass the antenna
cable through.
Claw
3. Connect the antenna cable to RF in terminal.
4. Installing the cable cover
Insert the 2 upper claws into
the mating slots.
Press in the bottom section
of the cover.
Removing the Cable Cover
Release the 2 lower claws
from their slots.
Slowly pull the cover downward.
2. Connection of TV and VCR using Scart
and RF
RF Connection
Connect the AERIAL to the Aerial In socket of the
VCR and an RF cable from the VCR Aerial Out
socket to the TV Aerial socket (
Scart Connections
The VCR can also be connected to the TV using
a Scart cable.
Connect AV1 of the VCR to AV1 Scart socket of
this set.
Note:
Further details of audio / video / satellite receiver
connections can be found on pages 33 and 34.
Coaxial cable
).