Removal Procedure; Removal Procedure Of Indoor Unit - York DHPM09NWM42Q1 Technical Manual
Lx series ductless multi-zone split heat pumps 16 seer – 1 phase 1.5 thru 3.5 nominal tons
Hide thumbs
Also See for DHPM09NWM42Q1:
Table of Contents
Advertisement
REMOVAL PROCEDURE
Removal Procedure of Indoor Unit
Be sure to wait for a minimum of 10 minutes after turning off all power supplies before disassembly.
STEPS
1. Before disassembly of the unit
2. Remove filter
3. Remove display
Johnson Controls Unitary Products
Axonometric drawing for the
complete unit.
panel
a. Open the panel.
b. Loosen the clasps
on the filter.
c. Draw out two
pieces of filter.
filter
Remove 2 screws fixing display,
and then remove the filter.
PROCEDURES
clasps
923212-UTG-A-0113
Display
17
Hide quick links:
Advertisement
Table of Contents
