Belling FSE 54 DO Users Manual & Installation Handbook page 31

USING THE MINUTE MINDER LI ¿WWHG
The digital timer enables you to set the
time of day (24 hour clock) and the
minute minder alarm.
Setting the "Time of Day"
1. Switch on the electricity supply to the
appliance.
7KH GLVSOD\ ZLOO ÀDVK
2. Press and release the time of day
button.
3. Set the time of day with the plus and
minus buttons.
4. The time will be set 7 seconds after the
last plus or minus operation.
Alarm tones
After setting the time of day, you can
select one of three alarm tones.
Press the minus button to listen to the
¿UVW WRQH WKHQ UHOHDVH WKH PLQXV EXWWRQ
and press it again to listen to the second
tone, etc.
Releasing the minus button after a tone
has sounded will automatically select that
tone.
Setting the minute minder
1. Press and release the plus button
to change the display from clock to
minute minder - the bell symbol will
light.
2. Use the plus and minus buttons to
set the length of time before the
alarm tone will sound. The display
will increase/decrease in units of 10
seconds up to 99 minutes 50 seconds,
and in units of 1 minute from 1 hour
40 minutes upwards. The maximum
period which may be set is 10 hours.
The display format will change after 99
minutes and 50 seconds to 1 hour and 40
minutes.
During countdown, the minute minder
has priority on the display, which will
show (in minutes : seconds, or hours :
minutes) the time remaining.
When countdown is complete, the tone
will sound for 7 minutes, or it can be
reset with one touch of any button.
To cancel the minute minder at any
other time, run down the set time with
the minus button.
The display will revert to show the time
of day.