Only use with Festool hose system IAS 2 or parts, you must have read and understood IAS 3 and Festool sanding pads! all safety instructions and information. Ig-...
Page 6
LEX 3 noring warning notes and instructions may re- and protective clothing. sult in serious injuries. – Check sanding pad before each use. Do not – Only trained and qualified persons are per- use the sanding pad if it is torn, broken or has mitted to set up, adjust and operate this fallen.
Page 7
Additional safety information for pneu- Festool to minimise the release of dust and matic machines vapours into the atmosphere. In dusty envi- – Compressed air can cause serious injuries.
Page 8
– Only work with correctly processed – Take good care of your tools. Keep the compressed air.Using the Festool supply tools sharp and clean to enable better and unit VE guarantees this. safer work. Follow the maintenance regula-...
The machine is designed for lubricated and An optimal work result can only be non-lubricated operation. achieved using original accessories and The Festool service unit VE must be used in consumables. The use of non-original lubricated operation. Consisting of a filter, accessories or consumables invalidates the control unit, condensation drain and lubrica- right to claim under warranty.
The order numbers of the accessories and tools can be found in the Festool catalogue or – Always secure the workpiece in such a on the Internet under "www.festool.com". manner that it cannot move while being processed.
Need help?
Do you have a question about the LEX 3 77/2,5 and is the answer not in the manual?
Questions and answers