Assembling Slot 1; Connectors, Dip-Switch, Jumpers; Power Supply Atx Connector; Power Control Connector - Siemens D1085-A Additional Technical Manual

2.2

Assembling Slot 1

Before inserting the CPU, you have to assembly the including stabilisators. Please be
i
carefully to avoid a damage of the mainboard.
2.3

Connectors, DIP-Switch, Jumpers

Some of the following connectors are optional!
!

2.3.1 Power supply ATX connector

Signal
Pin
11 + 3.3V
12 - 12V
13 GND
14 PS on (low
asserted)
15 GND
16 GND
17 GND
18 - 5V
19 + 5V
20 + 5V

2.3.2 Power control connector

Pin Signal
1 Monitor on
2 SV FAN off request (low asserted)
3 SV FAN full on (low asserted)
4 SV FAN pulse
5 SMB CLK
6 SMB DATA
7 VCC EEPROM
8 GND
Page 4
Pin Signal
1 + 3.3V
2 + 3.3V
3 GND
4 + 5V
5 GND
6 + 5V
7 GND
8 Powergood (high
asserted)
9 + 5V SB
10 + 12V
Additional Technical Manual
Pin 11
Pin 1
A26361-D1085-Z180-2-7619
Pin 1