Basic Configuration; Configuring Date And Time - Contemporary Controls CTRLink EIAR-10T User Manual

4.3.2.2

Basic configuration

HOSTNAME='heyfra'
.... the host name of the router
DOMAIN_NAME='lan.fli4l'
.... the domain name of the router
PASSWORD='ctr'
.... the password of the administrator access of the router
IP_ETH_1_IPADDR='192.168.1.100'
.... the IP address of the router
IP_ETH_1_NETMASK='255.255.255.0'
.... the netmask of the router
SER_CONSOLE_RATE='115200'
.... the baud rate of the serial console
The country code of the modem cannot be controlled via the file
</etc/rc.cfg>. To this end, the script <setCountry> is included in the
scope of supply. The command "setCountry -h" in the command line
indicates all country codes possible.
"setCountry device <code>" will set the modem specified in
<device> to <code>. <device> must be either:
•
/dev/ttyS1 for the external modem, or
• /dev/ttyS2 for the internal modem
If no <code> is specified, the script will simply output the country code
currently set for the appropriate modem.
4.3.2.3

Configuring date and time

TIME_INFO='UCT-1UCST,M3.5.0,M10.5.0'
Configuring time zone and daylight saving time; meaning:
•
UCT-1: Subtract an hour from the Greenwich Time.
• UCST: This time zone possesses a daylight saving time.
•
M3.5.0: The daylight saving time starts on the last (5) Sunday (0) of
the third (3) month.
Configuration
4-52