Menu Option "Http - Contemporary Controls CTRLink EIAR-10T User Manual

You may create a user for access to the SSH. If not, no additional user
will be created, and only access to the administrator is granted via SSH.
It is recommended to create an additional user here to provide an
additional less privileged access to the system.
NOTE
If you wish to create a user, it is imperative to enter a password;
otherwise, you will not be permitted to create a user. The password
follows the same rules as the password for access to the administrator
(max. 8 characters, letter, digits, special characters, etc.).
4.3.1.6
Since the HTTP server is required for configuring the router, it cannot
be turned off. You may define the port and the user.
Any changes you make here will only come into effect after restarting
the router. In other words: You may first finish configuring the router
without undue problems before you restart the router.
It is recommended to change both the user name and the
password of the default user. Please note that the web server
possesses its own user management so that neither the
administrator (root), nor the SSH user have access to the web
interface. Otherwise, the HTTP user specified here is not granted
NOTE
access to the router, neither via the serial console, nor via the
SSH.
The default port for an HTTP server is 80; all browsers poll this port by
default. If you want to use a different port here, you must add it in the
address line of your browser. For example http://192.168.1.100:8080,
sends an HTTP request to the host to port 8080 instead of port 80,
specifying address 192.168.1.100.

Menu option "HTTP"

Configuration
4-39